Conduit (flexible corrugated) ELEKTROPLAST 05.202 RKSG/PV 20/14.5 PVC 50 m 750 N

Flexible corrugated electrical conduit ELEKTROPLAST model 05.202 (RKSG/PV) is made of PVC and provides a protected channel for routing and insulating electrical wiring. With an internal diameter of 14.5 mm and an external diameter of 20 mm, the conduit is supplied in a 50 m roll and is designed for applications that require a flexible, crush-resistant protection for cables. The conduit’s axial compression and tensile rating of 750 N ensures mechanical resistance appropriate for general installation tasks indoors and in protected outdoor locations.

Advantages

The PVC construction combines flexibility with impact and crush resistance while remaining lightweight and easy to handle. Corrugated geometry improves bending performance and allows for tight radii without kinking. The product’s dimensional specifications (20 mm outer/14.5 mm inner) support common cable bundles and conduit fittings. A long 50 m roll reduces the number of joints and speeds up installation in longer runs.

Suitable for

• Routing and protecting power, control and communication cables in buildings
• Indoor installations and protected outdoor areas such as covered facades or service corridors
• Applications requiring flexible conduit with good crush resistance and repeated bending
• Concealed and surface-mounted installations where PVC conduit is acceptable

Key specifications

• Material: PVC (polyvinyl chloride)
• External diameter: 20 mm
• Internal diameter: 14.5 mm
• Length: 50 m (roll)
• Axial compression / tensile rating: 750 N
• Corrugated (flexible) design for improved bendability

How to use

Cut the conduit to the required length using appropriate tools for PVC, ensuring a clean, square cut. Deburr the cut edges if necessary. Route the conduit along the planned path, securing it with clips or straps at appropriate intervals and avoiding excessive tension that could overload the axial rating. Use compatible fittings, couplers and end caps rated for the conduit diameter to join sections and to interface with boxes or enclosures. When pulling cables, follow cable manufacturer limits for bend radius and pulling tension.

Usage recommendations

Store the roll in a dry, shaded area away from direct sunlight and sources of high heat. For outdoor exposure choose protected locations or provide additional UV protection if prolonged direct sunlight or harsh weather is expected. Verify compatibility of fittings and accessories with a 20 mm external diameter and confirm that the conduit meets local electrical codes for the intended installation.