Grounding Rod ELKO-BIS C1000112, steel/copper 0.25 mm Cu coating, 5/8" thread, 1.5 m

ELKO-BIS grounding rod C1000112 is a 1.5 m driven earthing electrode constructed with a steel core and a 0.25 mm copper coating. The rod is equipped with a 5/8" threaded end to accept standard connectors and clamps used in earthing and lightning protection systems. It is intended to form a low-resistance conductive path to earth for electrical installations at residential and commercial properties.

Advantages

The steel core provides mechanical strength for driving into soil while the copper coating ensures corrosion-resistant electrical conductivity. The 5/8" threaded end simplifies secure attachment of bonding conductors and clamps. The 1.5 m length offers a balance between penetration depth and ease of installation in typical ground conditions.

Suitable for

• Installation of electrical earthing systems for buildings
• Lightning protection and grounding of masts, antennas, and metal structures
• Equipotential bonding of electrical installations and distribution boards

Key specifications

• Overall length: 1.5 m
• Material: steel core with copper coating
• Copper coating thickness: 0.25 mm
• Thread type: 5/8" external thread for connector attachment
• Design: driven grounding rod for direct soil installation

How to use

Drive the rod vertically into the ground to the required depth using an appropriate hammer or driving head, taking care to protect the copper coating from mechanical damage during installation. Connect the earthing conductor or clamp to the 5/8" threaded end, ensuring a tight, corrosion-resistant mechanical and electrical connection. If multiple rods are required for adequate earth resistance, install them at the specified spacing and interconnect according to applicable earthing standards and local regulations.

Usage recommendations

Before installation, verify soil conditions and local standards to determine whether additional rods or supplementary earthing measures are needed. Use compatible clamps and connectors designed for copper-coated steel electrodes and inspect connections periodically for corrosion or loosening. In rocky or frozen ground, pre-drilling or specialist driving tools may be required to avoid damage to the coating.