Ground Rod Clamp ELKO-BIS C1060302 for 5/8" grounding rods, steel construction

ELKO-BIS Ground Rod Clamp C1060302 is a steel clamp designed for secure mechanical and electrical connection between grounding conductors and 5/8" (five-eighth inch) grounding rods. Intended for earthing installations in residential, commercial and light industrial environments, the clamp ensures a stable bond between a conductor and the ground rod using a durable steel construction and a robust fastening mechanism.

Advantages

The steel construction provides mechanical strength and long-term durability in typical installation conditions. The clamp is shaped and sized specifically for 5/8" ground rods, ensuring a tight fit and reliable electrical contact. Its design facilitates straightforward installation and a consistent connection that resists loosening under normal environmental and mechanical stress.

Suitable for

• Bonding grounding conductors to 5/8" grounding rods
• Residential earthing systems
• Commercial electrical grounding installations
• Light industrial grounding and lightning protection grounding points

Key specifications

• Material: steel
• Compatible rod diameter: 5/8" (five-eighth inch)
• Connection type: clamp for conductor-to-rod bonding
• Application environment: indoor and outdoor earthing installations
• Typical use: grounding conductor attachment and bonding

How to use

Position the clamp around the 5/8" grounding rod at the required height, place the grounding conductor in the clamp seating area, then tighten the fastening mechanism until a secure mechanical and electrical connection is achieved. Ensure the conductor is clean and free of paint, corrosion or insulating coatings at the contact point to maintain low-resistance electrical contact. After tightening, verify that the clamp is stable and that the conductor cannot move under expected loads.

Usage recommendations

For reliable long-term performance, use the clamp in accordance with local electrical codes and grounding standards. Inspect the connection periodically for corrosion or loosening, and re-tighten or replace the clamp if any degradation is detected. When used outdoors, consider additional corrosion protection measures appropriate to the installation environment.