-
Contrast ratio (typical):
The difference in light intensity between the brightest white and the darkest black.
-
1300:1
-
Viewing angle, horizontal:
Maximum horizontal angle at which a display can be viewed with acceptable visual performance.
-
178 °
-
Viewing angle, vertical:
Maximum vertical angle at which a display can be viewed with acceptable visual performance.
-
178 °
-
Mean time between failures (MTBF):
Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
-
50000 h
-
Operating relative humidity (H-H):
-
20 - 80
-
Storage temperature (T-T):
The minimum and maximum temperatures at which the product can be safely stored.
-
-20 - 60
-
Display diagonal:
Size of the display for this product, measured diagonally, usually in inches.
-
23.8 "
-
Operating temperature (T-T):
The minimum and maximum temperatures at which the product can be safely operated.
-
0 - 40
-
Storage relative humidity (H-H):
-
10 - 95
-
Display brightness:
Brightness is the amount of radiating light emitted from the screen. The brightness rating is measured in candellas per square meter, commonly known as 'nits'.
-
250 cd/m²
-
Input voltage:
The voltage (V) which is required to power the product.
-
100 - 240
-
Response time:
The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)
-
14 ms
-
Display resolution:
The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.
-
1920 x 1080
-
Wall mountable:
The product can be mounted on (attached to ) a wall.
-
Yes
-
USB connector type:
The type of USB connector/port that this product has.
-
USB Type-B, USB Type-A, Micro-USB
-
Cables included:
-
VGA, USB, HDMI
-
Number of built-in speakers:
-
2
-
RMS rated power:
RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.
-
2 W
-
Power consumption (off):
-
0.24 W
-
Power consumption (standby):
The amount of electricity that is consumed when the product is on standby.
-
1 W
-
DC-in jack:
The socket/plug where the DC electricity supply connects to the device.
-
Yes
-
Built-in speaker(s):
The device contains speaker(s) to produce sound.
-
Yes
-
Purpose:
What the product is used for.
-
Commercial
-
On Screen Display (OSD):
-
Yes
-
Placement supported:
Where the product can be placed e.g. indoor/outdoor, horizontal/vertical.
-
Indoor
-
Audio (L/R) in:
The two sockets (ports) for receiving left audio signal (white cable) and right audio signal (red cable).
-
1
-
Audio (L/R) out:
The two sockets (ports) for transmitting left audio signal (white cable) and right audio signal (red cable).
-
1
-
HDMI ports quantity:
The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
-
1
-
Panel mounting interface:
The product can be used wih VESA mounting interfaces.
-
100 x 100
-
On Screen Display (OSD) languages:
-
JPN, ITA, FRE, ESP, ENG, DEU, CHI (TR), CHI (SIMPL)
-
Touchscreen:
A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.
-
No
-
Product design:
The creation of a plan or convention for the construction of an object or a system.
-
Digital signage flat panel
-
HDMI version:
-
1.4
-
Maximum frame rate:
This is the maximum frame rate, also known as frame frequency and frames per second (FPS). It is the frequency (rate) at which an imaging device produces unique consecutive images called frames. The term applies equally well to film and video cameras, computer graphics, and motion capture systems. Frame rate is most often expressed in frames per second (FPS) and is also expressed in progressive scan monitors as hertz (Hz).
-
75 fps
-
Number of OSD languages:
-
10
-
International Protection (IP) code:
The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
-
IP54
-
USB version:
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the interface used for connection, communication and power supply between computers and electronic devices. Every new version - for example 1.1, 2.0, 3.0 - is much faster than the previous one.
-
2.0
-
Power consumption (max):
The maximum amount of power used by the device.
-
18.5 W
-
Display technology:
The technology used in the display e.g. plasma, LED.
-
LED
-
Anti-glare screen:
Always gives an optimal view, even in direct sunlight.
-
Yes
-
Display depth:
-
319.38 mm
-
Display height:
-
42.8 mm
-
Display weight:
-
3600 g
-
DisplayPort version:
-
1.2
-
Native aspect ratio:
The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.
-
16:9
-
HD type:
Type of supported High Definition (e.g. Full HD, 4K Ultra HD).
-
Full HD
-
USB ports quantity:
-
6
-
Panel type:
-
TFT-LCD
-
Display width:
-
542.68 mm
-
Active display area (W x H):
-
527 x 296.5
-
VESA mounting:
-
Yes
-
Screen shape:
-
Flat
-
Display number of colours:
-
16.7 million colours
-
Energy efficiency scale:
Range of energy efficiency levels classifying devices from most to least energy-efficient.
-
A to G
-
Energy efficiency class (SDR):
Energy efficiency class is a standard classification that is used all over Europe and which is understandable at first sight. Products can be efficiently compared according to classes, starting from A (the most energy efficient class), and ending with G (the most energy-intensive class). The classification of energy efficiency is based on annual energy consumption which is being calculated on the basis of several different parameters.
-
E
-
Energy consumption (SDR) per 1000 hours:
Power consumption in switched-on state expressed in W.
-
21 kWh
-
Compliance certificates:
Indicates which regulatory, safety, and environmental standards the product complies with, as verified by recognized authorities or certification bodies.
-
CE, CB, BSMI, BIS, China Compulsory Certification (CCC), cUL, WEEE, VCCI, UKCA, RoHS, REACH, RCM, KCC, Federal Communications Commission (FCC), EAC, China RoHS
