Wall-mounted EV charger ELOAD TietoSet 1x16A 3.7 kW – single-phase home/workplace charging

eLOAD P1 is a portable charger for electric and plug-in hybrid vehicles with a Type 2 vehicle connector. The unit plugs directly into a standard Type F (Schuko) mains socket and provides adjustable single-phase AC charging power from 1.8 to 3.7 kW. The charger supports a user-set charging delay of 0–10 hours, includes a carrying bag and instructions, and is designed for durability and operation in harsh Nordic conditions. A 24‑month warranty is provided.

Advantages

The eLOAD P1 offers simple plug-and-play operation without the need for fixed electrical installation, selectable charging current steps (8, 10, 13, 16 A) for flexible power control, and built-in Type B residual current protection for both AC and DC fault detection. Its compact, lightweight design with approximately 5 m Type 2 cable and IP65-rated charging box (IP54 at the connector) enables outdoor use and easy handling.

Suitable for

• Home charging for plug-in hybrid vehicles and small electric cars
• Temporary or mobile charging where fixed installation is not available
• Overnight or daytime top-up charging at workplaces or garages

Key specifications

• Charging mode: Mode 2 (in-cable control box)
• Connector to vehicle: Type 2
• Mains connector: Type F (Schuko) 1×16 A
• Phases: Single-phase, 230 V
• Adjustable charging current: 8, 10, 13, 16 A
• Charging power range: 1.8–3.7 kW (1,800–3,700 W)
• Cable length (Type 2): approx. 5 m
• Fault current protection: Type B (IΔn 30 mA, DC 6 mA)
• Ingress protection: IP65 (charging box) / IP54 (Type 2 connector)
• Operating temperature range: -30 to +50 °C
• Dimensions (L×W×H): 225 × 95 × 65 mm
• Weight: 2.1 kg
• Colour: Black

How to use

Connect the charger’s mains plug to a suitable Type F (Schuko) socket rated for 16 A, select the desired charging current step on the unit, connect the Type 2 plug to the vehicle inlet and set the optional charging delay (0–10 hours) if delayed start is required. Monitor charging via the vehicle’s dashboard or the charger indicators and disconnect when charging is complete. Follow the supplied instructions for safety and installation notes.

Usage recommendations

Use only properly rated and earthed mains sockets; avoid using the charger with damaged cables or connectors. For frequent daily use or higher charging power needs consider a permanently installed wallbox. Store the charger in the included carrying bag when not in use and protect it from prolonged exposure to extreme conditions beyond the specified -30 to +50 °C range.