Wall-mounted wireless switch Eltako FRP61-230V Blue 230 V, 45 mm

Eltako FRP61-230V Blue is a wall-mounted wireless switch designed for 230 V installations with a compact 45 mm diameter. The device provides remote switching of lighting and other electrical loads without the need for additional wiring between switch and actuator. It is intended for integration into wireless building control systems where reliable, flexible control is required, and it can be applied both in retrofit projects and new installations.

Advantages

The switch offers wireless operation at mains voltage, eliminating the need to run control wiring and simplifying installation. Its compact form factor and standard wall-mount design allow placement on existing surfaces or frames. The product supports battery-free or low-power implementations depending on how it is installed and paired with compatible actuators, reducing maintenance needs. The blue finish provides a clear visual identification for specific circuits or zones.

Suitable for

• Remote control of indoor lighting circuits
• Retrofit installations where adding wiring is impractical
• Integration into wireless building automation systems
• Switching of resistive and moderate inductive loads within rated limits

Key specifications

• Supply voltage: 230 V AC
• Mounting: wall-mounted, 45 mm diameter
• Wireless operation: compatible with standard wireless building control protocols (as supported by the control system)
• Colour: blue
• Intended use: switching of lighting and electrical loads within rated current

How to use

Install the switch on a suitable flat surface or wall box following local electrical regulations and ensuring the mains supply is isolated before work begins. Pair the device with a compatible wireless actuator or controller according to the system manufacturer’s pairing procedure. After commissioning, operate the switch to send on/off commands to the paired actuator; the switch may be used for single or multi-way control depending on system configuration. Observe rated load limits and do not exceed the specified current for connected devices.

Usage recommendations

Locate the switch within reliable wireless range of the actuator or a repeater. For retrofit projects, check existing wall box depth and mounting surface to ensure secure attachment. Use in environments protected from direct moisture and extreme temperatures. For safety and compliance, installation and connections should be performed by a qualified electrician familiar with local wiring standards.