Terminal bracket ENSTO SO270 for through-corner cable connection 2×(25–35) mm² and 4×(16–120) mm²

ENSTO SO270 is a terminal bracket engineered for through-corner cable routing and connection in electrical distribution installations. The bracket accepts two conductors in the range 25–35 mm² and four conductors in the range 16–120 mm², providing a stable mechanical support point and organized cable entry where cables pass around corners. It is intended for use in cabinets, pole-mounted or wall-mounted assemblies to secure cable routes and provide strain relief for connected conductors.

Advantages

The terminal bracket provides robust mechanical anchoring for medium- and large-section conductors, helping to reduce stress on terminations. Its design enables neat through-corner routing and maintains conductor separation for safer, more orderly cable management. Installation requires no additional complex components, and the bracket is compatible with common electrical enclosure and mounting arrangements.

Suitable for

• Through-corner cable entries in distribution cabinets
• Pole-mounted or wall-mounted electrical assemblies
• Installations requiring strain relief for 25–35 mm² and 16–120 mm² conductors
• Arrangements where organized cable anchoring and mechanical support are needed

Key specifications

• Conductor accommodation: two conductors 25–35 mm² and four conductors 16–120 mm²
• Intended use: through-corner cable routing and anchoring
• Function: mechanical support and strain relief for connected cables
• Typical mounting: cabinet, pole or wall-mounted assemblies

How to use

Position the ENSTO SO270 bracket at the intended through-corner entry point and secure it to the enclosure or mounting structure following standard mounting practices. Arrange conductors into the appropriate accommodation holes according to their cross-section ranges (two for 25–35 mm² and four for 16–120 mm²) and fasten as required to achieve mechanical anchoring and strain relief. Ensure conductors are routed without excessive bending and that connections to terminals are accessible for inspection and maintenance.

Usage recommendations

Verify conductor cross-sections before installation and follow relevant electrical codes and enclosure manufacturer instructions. Use appropriate cable clamps, grommets or insulation where needed to maintain electrical clearances and avoid sharp edges. Periodically inspect the bracket and cable entries for signs of abrasion or movement and resecure if necessary.