We are comparing the Ergom HI 0,5/8 insulated cord end terminal with several alternative options from the same manufacturer: Ergom HI 0,25/8 E, Ergom HI 0,75/6 DIN, Ergom HI 2X4/12, Ergom HI 0,34/8, and Ergom HI 2.5/18 F. All of these products share the same fundamental purpose of providing secure and reliable wire termination for stranded copper conductors, preventing strand fraying, and ensuring optimal electrical contact in terminal blocks and control panels. The main practical differences lie in the conductor cross-section, pin length, terminal type (single or twin for two wires), and package quantity, which directly determine compatibility with specific wire gauges.
⚙️ The specifications comparison table below covers key parameters such as conductor cross-section, pin length, terminal type, and pack size to help you choose the correct size for your electrical installation needs.
| Feature | Ergom HI 0,5/8 | Ergom HI 0,25/8 E | Ergom HI 0,75/6 DIN | Ergom HI 2X4/12 | Ergom HI 0,34/8 | Ergom HI 2.5/18 F | Practical significance |
|---|
| Product type | Single cord end terminal | Single cord end terminal | Single cord end terminal | Twin cord end terminal | Single cord end terminal | Single cord end terminal | Determines the number of wires that can be inserted into a single terminal. |
| Conductor cross-section | 0.5 mm² | 0.25 mm² | 0.75 mm² | 2 x 4 mm² | 0.34 mm² | 2.5 mm² | The primary parameter for matching the terminal to the specific wire gauge. |
| Pin length | 8 mm | 8 mm | 6 mm | 12 mm | 8 mm | 18 mm | Affects insertion depth into equipment screw terminals and connection blocks. |
| Pack quantity | 500 pcs | 500 pcs | 500 pcs | 100 pcs | 500 pcs | 500 pcs | Package volume suitable for installation projects of different scales. |
◎ The suitability table below evaluates different usage scenarios to help determine which terminal option best fits your specific electrical wiring project.
| Use case | Recommended product | Why |
|---|
| Wiring with 0.5 mm² conductors | Ergom HI 0,5/8 | Perfectly matched to the wire size and DIN standard for standard low-voltage circuits and control panels. |
| Working with ultra-thin 0.25 mm² wires | Ergom HI 0,25/8 E | Provides a secure clamp for minimum-gauge stranded conductors without damaging fine strands. |
| Connecting 0.75 mm² conductors | Ergom HI 0,75/6 DIN | Designed specifically for thicker flexible stranded wires with a matching 6 mm stripping length. |
| Terminating two wires into a single terminal | Ergom HI 2X4/12 | Allows safe termination and combination of two 4 mm² conductors in a single connection point. |
| Installing 0.34 mm² wiring | Ergom HI 0,34/8 | A specialized solution tailored for intermediate cable cross-sections in a turquoise finish. |
| Power wiring installation at 2.5 mm² | Ergom HI 2.5/18 F | Built to handle higher current loads and power distribution circuits in switchboards. |
The Ergom HI 0,5/8 terminal is specifically engineered for 0.5 mm² conductors and differs from alternative models through its exact dimensional compatibility with that wire gauge. Choose this product if you are working with 0.5 mm² wire and require a standard 8 mm pin length for clean installation in terminal blocks. For different wire cross-sections or when connecting two wires simultaneously, select the appropriate alternative model from the Ergom range.
