Power supply eSPe ESPE LP-3024 30W 1.25A 24V IP67 sealed 50x47x25 mm

The eSPe ESPE LP-3024 sealed switching power supply delivers a stable 24 V DC output with a maximum current of 1.25 A and total output power up to 30 W. Housed in a compact IP67-rated enclosure measuring 50×47×25 mm, this unit is designed to protect internal electronics from dust and moisture, enabling reliable operation in outdoor, industrial and building-automation environments. Typical uses include powering LED strips and modules, sensors, controllers and other low-power devices that require a consistent 24 V supply.

Advantages

The sealed IP67 enclosure provides protection against dust and temporary immersion in water, extending service life in harsh conditions. Its switching topology offers efficient conversion with reduced heat generation and a compact footprint that fits constrained installation spaces. The unit’s fixed 24 V output and 30 W power rating simplify system design for applications that need a dedicated low-power DC source.

Suitable for

• Outdoor LED lighting and signage
• Industrial sensors and control modules
• Building automation controllers and actuators
• Low-power communication and monitoring devices

Key specifications

• Output voltage: 24 V DC
• Maximum output current: 1.25 A
• Maximum output power: 30 W
• Enclosure rating: IP67 (dust-tight and protected against temporary immersion)
• Enclosure dimensions: 50 × 47 × 25 mm
• Switching power supply topology for efficient conversion

How to use

Mount the power supply in a location that maintains the IP67 protection level—ensure enclosure seals and cable entries remain intact. Connect the AC input and the 24 V DC output following safety and wiring standards applicable in your region. Verify polarity and load requirements before powering the unit. Allow adequate ventilation around the unit if installed within confined spaces, and avoid placing it in locations with prolonged direct heat sources.

Usage recommendations

Use this sealed 24 V power supply for devices where moisture or dust exposure is possible and where a compact, efficient 30 W source is sufficient. For installations with higher ambient temperatures or continuous near-maximum loads, verify derating curves and consider mounting arrangements that dissipate heat. Regularly inspect cable seals and connections to maintain IP67 integrity.