3D printer filament eSun EPLA-SILK 1.75 mm — Forest color, 1 kg spool

eSun EPLA-SILK 1.75 mm — Forest color, 1 kg spool is a silk-finish PLA filament formulated for FDM/FFF 3D printers that accept 1.75 mm filament. The PLA-SILK material yields a glossy, satin-like surface that reduces visible layer lines and enhances visual appeal without special post-processing. The 1 kg spool provides a substantial amount of material for decorative models, display pieces and functional prototypes with an emphasis on appearance.

Advantages

The silk PLA formulation delivers a smooth, reflective finish that emphasizes edges and contours while maintaining the dimensional stability and ease of printing associated with standard PLA. Its Forest color is consistent across the spool and suitable for single-color prints and multi-part assemblies where visual consistency is required. The filament is compatible with typical PLA print settings on most FDM/FFF printers and feeds reliably from common spool mounts.

Suitable for

• Decorative models and display pieces
• Visual prototypes and concept models
• Cosmetic parts, ornaments and accessories
• Low-warp mechanical prototypes that require good surface quality

Key specifications

• Material type: PLA-SILK (silk-finish polylactic acid)
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg net filament
• Finish: glossy, satin-like surface
• Color: Forest (deep green shade)

How to use

Load the 1.75 mm filament into a compatible FDM/FFF 3D printer and use standard PLA print temperatures, typically in the range recommended by the printer or filament manufacturer for PLA. Begin with a nozzle temperature around 190–210 °C and a heated bed temperature if used at 40–60 °C, then adjust based on extrusion consistency and layer adhesion. Ensure the printer’s feeding path and extruder are set for 1.75 mm filament and verify first-layer calibration for optimal bed adhesion and surface finish.

Usage recommendations

Store the spool in a dry environment or sealed container with desiccant to maintain consistent print quality. For best surface appearance, print at moderate speeds and avoid excessive retraction or high cooling that can reduce gloss. If stronger inter-layer bonding is required, increase nozzle temperature slightly within safe limits and verify dimensional accuracy on test prints before final production.