3D printer filament PLA-BASIC 1.75 mm 1 kg spool, eSun, cold white

eSun PLA-BASIC 1.75 mm 1 kg spool in cold white is a general-purpose PLA filament designed for FDM/FFF 3D printers. The filament is supplied on a 1 kg refill spool with a nominal diameter of 1.75 mm to ensure stable feeding and consistent extrusion. Intended for standard PLA printing conditions, this cold white filament provides predictable layer adhesion and surface finish suitable for prototypes, household parts and decorative objects.

Advantages

This PLA filament offers dimensional consistency and reliable feeding on most consumer and prosumer 3D printers that accept 1.75 mm material. Its formulation targets standard extrusion temperatures for PLA, helping minimize warping and stringing when recommended settings are used. The cold white color provides a neutral base for painting, post-processing or multi-part assemblies while maintaining good layer visibility for quality control.

Suitable for

• Functional prototypes and concept models
• Household fixtures and replacement parts with moderate mechanical demands
• Decorative items, figurines and display models
• Educational projects and classroom printing

Key specifications

• Material: Polylactic acid (PLA)
• Filament diameter: 1.75 mm (nominal)
• Spool weight: 1 kg net filament
• Color: cold white
• Compatibility: FDM/FFF 3D printers that accept 1.75 mm filament

How to use

Load the 1.75 mm PLA filament onto a compatible extruder and set the printer to typical PLA extrusion temperatures (refer to your printer or nozzle manufacturer for exact values). Preheat the nozzle and, if used, a build surface to the recommended temperature, then prime the nozzle until extrusion is stable. Print with appropriate layer height and print speed for your nozzle diameter, and allow printed parts to cool sufficiently before removal to reduce deformation.

Usage recommendations

Store the spool in a dry environment or sealed container with desiccant when not in use to preserve printability. If stringing or adhesion issues occur, fine-tune retraction, print temperature and cooling settings; use a heated bed or adhesive surface if needed for first-layer adhesion on larger prints.