3D printing filament eSun PLA-BASIC175Z1P1 1.75 mm, PLA, Purple, 1 kg

eSun PLA-BASIC175Z1P1 is a 1 kg spool of 1.75 mm PLA filament in purple designed for FDM/FFF 3D printers. Made from standard polylactic acid, this filament provides straightforward handling, low tendency to warp and minimal odor during printing. It is intended for general-purpose use such as prototypes, scale models, household items and hobby projects, and is compatible with printers that accept 1.75 mm PLA filament.

Advantages

This PLA filament offers consistent diameter and good layer adhesion for reliable extrusion and uniform prints. Its low printing temperature range and reduced warping make it suitable for open-frame and enclosed printers alike. The color is evenly distributed to give stable visual results on parts where appearance matters, while the material's compostable origin supports applications where biodegradability is preferred over more persistent plastics.

Suitable for

• Rapid prototyping and functional mock-ups
• Decorative and scale models
• Household items, organizers and holders
• Educational and hobbyist printing projects

Key specifications

• Material: polylactic acid (PLA)
• Filament diameter: 1.75 mm
• Spool weight: 1 kg (net filament)
• Color: purple
• Recommended nozzle temperature: typical PLA range (check your printer guidelines)
• Recommended print bed: heated or unheated with suitable adhesion surface
• Compatibility: FDM/FFF printers accepting 1.75 mm PLA filament

How to use

Load the 1.75 mm filament into the printer according to the printer manufacturer's instructions and preheat the nozzle to a suitable temperature for PLA. Begin printing with conservative settings for first layers to ensure good bed adhesion; typical starting points are moderate nozzle temperature and standard print speed for PLA. Monitor the first layers to confirm extrusion consistency and adjust temperature or flow if needed. After printing, allow parts to cool before removal to minimize deformation.

Usage recommendations

For best results, store the spool in a dry place or sealed container with desiccant to prevent moisture absorption. Use a build surface or adhesive suitable for PLA to reduce lifting, and consider lowering print speed or enabling cooling fans for fine detail and bridging. Avoid prolonged exposure to high temperatures and direct sunlight to preserve color and mechanical properties.