3D printer filament eSun PLA MATTE DUAL 1.75mm Green/Pink 1kg

Dual-color eSun PLA MATTE DUAL 1.75mm Green/Pink 1kg is a two-tone PLA filament designed for FDM desktop 3D printers that accept 1.75 mm filament. The material provides the low-warping, easy-print behavior typical of PLA while producing a subdued, matte surface that reduces glare and highlights. The spool contains two distinct colors (green and pink) on a single coil, enabling multitonal prints and color transitions without needing to swap spools during a print.

Advantages

The dual-color format reduces interruption during prints by offering two colors on one spool, simplifying the process of producing multi-colored parts on single-extruder machines. The PLA MATTE formulation delivers reliable layer adhesion, low shrinkage and a soft, non-reflective finish that is appropriate for display models, prototypes and decorative items. Compatibility with common desktop FDM printers and standard printing temperatures makes setup straightforward for hobbyists and professionals.

Suitable for

• Multitone figurines and decorative models
• Single-extruder prototypes that require two colors or color transitions
• Desktop FDM printers using 1.75 mm filament
• Low-post-processing parts where a matte aesthetic is preferred

Key specifications

• Material: PLA (polylactic acid) with matte surface finish
• Diameter: 1.75 mm nominal
• Net weight: 1 kg spool
• Colors: green and pink on a single spool (dual-color)
• Recommended printability: low warping, good layer adhesion
• Intended printer type: desktop FDM/FFF printers with 1.75 mm filament feed

How to use

Load the spool onto the printer's filament holder and feed the filament into the extruder according to your printer's standard procedure for 1.75 mm filament. Set nozzle and bed temperatures appropriate for PLA (consult your printer and slicer settings); typical nozzle temperatures are in the PLA range and a heated bed is optional. Calibrate extrusion multiplier and retraction settings to match the dual-color filament behavior to avoid under- or over-extrusion. Use standard slicing software to prepare prints; to exploit the two colors, design models with color change points or use pause commands and filament feed techniques supported by your printer.

Usage recommendations

Store the filament in a dry, dust-free environment and keep it sealed with desiccant when not in use to preserve print quality. For best results, print at moderate speeds and verify temperature and retraction settings on short test prints before producing final parts. Avoid prolonged exposure to direct sunlight to retain color consistency.