3D printer filament spool eSun PLA MATTE DUAL 1.75mm Green/Purple 1 kg

eSun PLA MATTE DUAL 1.75mm Green/Purple 1 kg is a dual-color polylactic acid filament designed for FDM/FFF 3D printers that accept 1.75 mm PLA. The filament combines green and purple matte finishes on a single spool, producing prints with low-gloss surfaces that reduce visible layer highlights and provide a subdued, professional appearance. With a 1 kg net weight and consistent diameter, this filament is intended for general-purpose prototyping, decorative models and educational projects where matte aesthetics and reliable extrusion are required.

Advantages

The matte surface minimizes reflections and hides small surface imperfections, making post-processing easier and often reducing the need for sanding or painting. The PLA base offers straightforward printing behavior, good bed adhesion on common build surfaces, and compatibility with standard PLA temperature ranges. Dual-color presentation on a single spool allows visual variation without changing filaments mid-print when used for multi-part assemblies or for producing small batches with mixed color outputs.

Suitable for

• Prototypes and concept models with subdued finishes
• Decorative parts, figurines and display models
• Educational prints and classroom projects
• Light functional parts that do not require high heat resistance
• Visual samples and color-variation demonstrations

Key specifications

• Base material: Polylactic Acid (PLA)
• Filament diameter: 1.75 mm
• Spool net weight: 1 kg
• Finish: Matte (low gloss)
• Color: Dual — Green and Purple
• Recommended printing temperature: typical for PLA (consult printer settings)
• Recommended bed surface: glass, PEI or blue tape for improved first-layer adhesion

How to use

Load the 1.75 mm filament into the printer according to your printer manufacturer’s instructions and select a PLA profile in the slicer. Set nozzle and bed temperatures within your printer’s typical PLA range and use moderate print speeds to ensure consistent extrusion. Calibrate the first layer and extrusion multiplier as needed for precise dimensional results. Allow printed parts to cool on the build plate before removal to reduce warping; trim or lightly sand any minor imperfections where required.

Usage recommendations

Store the filament in a dry, cool place away from direct sunlight and seal the spool in a moisture-resistant bag when not in use. Avoid printing parts that will be exposed to sustained high temperatures or mechanical loads beyond PLA’s typical capabilities. For improved surface uniformity, print at slightly slower speeds and ensure stable cooling settings in the slicer.