EUROLITE DMX cable SEC-1 IP65 3-pin 20 m black for outdoor use

EUROLITE DMX cable SEC-1 IP65 3-pin 20 m black for outdoor use is a 20-metre DMX cable designed to transmit control signals between lighting consoles, fixtures and splitters in outdoor and indoor installations. The cable features a 3-pin configuration compatible with standard DMX512 devices and an IP65-rated jacket that offers protection against dust and water splashes, making it suitable for temporary outdoor events, stages and installations where increased environmental protection is required.

Advantages

The cable combines a standard 3-pin DMX wiring scheme with an IP65 protective design, reducing the risk of signal interruption caused by moisture or dust. Its 20 m length provides flexibility for placement of controllers and fixtures without the need for additional extensions. The black outer sheath is unobtrusive in stage and event setups, and the construction is intended to maintain signal integrity for reliable lighting control.

Suitable for

• Connecting DMX512 lighting consoles to fixtures and moving heads at outdoor events
• Temporary festival stages and outdoor installations where splash protection is needed
• Indoor venues that benefit from a robust, dust-resistant cable
• Linking DMX splitters, dimmer racks and controllers in rental and touring setups

When it may not be suitable

This cable uses a 3-pin DMX connector configuration; some professional rigs and permanent installations use 5-pin DMX for full compatibility with industry-standard pinouts. For permanent outdoor installations requiring continuous immersion protection or full weatherproofing at connector interfaces, an IP65 rating for the cable jacket alone may not be sufficient without appropriate protected connectors or sealed junctions.

Key specifications

• Length: 20 m
• Connector configuration: 3-pin DMX compatible
• Ingress protection: IP65 (splash and dust protection for the jacket)
• Colour: Black outer sheath
• Application: DMX signal transmission for lighting control

How to use

Connect the 3-pin ends to the DMX output of a lighting console and the DMX input of the first fixture or to a splitter following the correct pin assignment. Route the cable to avoid sharp bends, high-tension points and moving parts. For outdoor use, ensure connectors and connection points are oriented to minimise direct water ingress and consider using additional weatherproofing accessories at the connector interfaces. Test the DMX signal before the event to confirm communication across all devices.

What to consider before purchase

• Ensure your fixtures and controllers accept 3-pin DMX connections and the pinout matches your equipment requirements
• For permanent outdoor installations, check whether additional sealing or higher ingress protection at connectors is required
• Verify the required cable length for your setup to avoid excessive joins that can affect signal quality

Usage recommendations

For reliable outdoor operation, pair the IP65-rated cable with protected connector junctions and avoid prolonged exposure to heavy rain without sealed connectors. Use proper DMX termination at the end of the line and keep cable runs tidy to preserve signal integrity during events and tours.