LED IP T-PIX 18 QCL Bar IP65 RGBW Pixelleiste 106 cm 18×8W by EUROLITE

EUROLITE LED IP T-PIX 18 QCL Bar IP65 RGBW Pixelleiste 106 cm 18×8W is a weatherproof, pixel-addressable LED bar designed for outdoor and indoor applications. At 106 cm length it houses 18 individually controllable 8W QCL LEDs offering RGBW color mixing and pixel effects. The IP65-rated housing and sealed connectors provide protection against dust and water jets, making the fixture suitable for façades, stages, event perimeters and architectural washes where dynamic, controllable light is required.

Advantages

The LED IP T-PIX 18 QCL Bar delivers precise pixel control for complex animations, chases and color gradients while maintaining a compact 106 cm format. Its high-power 8W QCL diodes provide intense output and consistent color mixing across RGBW channels. The IP65-rated mechanical design and sealed connections ensure reliable outdoor operation and reduce maintenance needs in exposed environments. Flexible mounting options and compatibility with common pixel control protocols enable integration into existing lighting rigs and architectural installations.

Suitable for

• Outdoor façade lighting and architectural accenting
• Stage and event perimeters where pixel effects are required
• Dynamic washes and color animations in indoor venues
• Installation in semi-permanent outdoor displays and signage

When it may not be suitable

This pixel bar is intended for professional lighting applications and may be more than required for simple single-color or static wash tasks. It requires a suitable pixel controller and power supply capable of addressing multiple 8W LEDs and managing RGBW channels, so it is not a plug-and-play solution for users without compatible control hardware.

Key specifications

• Length: 106 cm
• Number of pixels: 18 individually addressable pixels
• LED type: QCL high-power RGBW LEDs, 8W per pixel
• Ingress protection: IP65 (dust-tight and protected against water jets)
• Color control: RGBW color mixing with individual pixel addressing
• Housing: weatherproof sealed enclosure with mounting brackets

How to use

Mount the LED bar using the supplied brackets or compatible fixtures on a stable surface, ensuring appropriate orientation for water drainage and access to sealed connectors. Connect the power supply matched to the total power consumption and wire the pixel data to a compatible pixel controller supporting the bar's control protocol. Configure the controller to address 18 pixels and set RGBW channels per pixel as required. Test individual pixels and sequences at low intensity before full-power operation and verify that all connectors and seals are tight to maintain IP65 protection.

What to consider before purchase

• Ensure you have a compatible pixel controller and cabling for individually addressable RGBW pixels
• Verify power supply capacity and voltage requirements for 18×8W LEDs plus control equipment
• Confirm mounting space and orientation for the 106 cm length and bracket positions
• Check environmental conditions to ensure IP65 rating is sufficient for the installation

Usage recommendations

For reliable long-term outdoor operation, use waterproof cable glands and UV-resistant mounting hardware, program test patterns to check pixel addressing before final commissioning, and allow for adequate ventilation and heat dissipation when installing multiple bars in close proximity.