EUROLITE LED IP PT-100/34 RGB/WW Pixel DMX Tube IP65 102 LEDs 1m length

The EUROLITE LED IP PT-100/34 RGB/WW Pixel DMX Tube is a one-metre, weather-resistant lighting element that integrates 102 individually addressable LEDs combining RGB color control with warm white (WW) output. With an IP65 rating and DMX pixel control capability, this tube is intended for accent, architectural, and stage lighting where precise pixel effects and outdoor durability are required. The slim, linear form factor provides continuous light runs or discrete pixel points for dynamic designs.

Advantages

This IP65-rated DMX tube provides individually addressable pixels for high-resolution effects along a 1 m length. The integrated RGB plus warm white LEDs allow both saturated color effects and natural warm-white illumination without additional fixtures. Built for indoor and outdoor use, the tube is designed for straightforward DMX integration and flexible placement in accent, façade, or stage installations.

Suitable for

• Architectural façade lighting and outdoor accent illumination
• Stage and event perimeter or set lighting with pixel effects
• Linear runs in signage, coves, and retail displays requiring weatherproof components
• Dynamic outdoor installations where individually addressable LEDs are needed

When it may not be suitable

This tube is designed primarily for pixel-controlled applications and may be excessive for simple single-color or non-addressable linear lighting needs. If the project requires a non-DMX, constant-voltage strip or an extremely compact non-protected LED solution, a different product may be more appropriate.

Key specifications

• Length: 1 metre
• LED type and count: 102 individually addressable LEDs
• Color capability: RGB plus warm white
• Control: Pixel-addressable DMX control compatible
• Ingress protection: IP65 (splash and dust protected)

How to use

Install the tube along the intended run and connect power and DMX control according to the system wiring scheme. Configure DMX channels so each pixel or group of pixels matches the control addressing required by your lighting software or controller. Secure mounting points and use approved outdoor connectors and cabling when installing in exterior locations. Observe manufacturer guidance for maximum run lengths and power distribution to prevent voltage drop and ensure consistent pixel performance.

What to consider before purchase

• Compatibility of your DMX controller or pixel-mapping software with individually addressable RGB/WW pixels
• Power supply capacity and distribution for multiple tubes to avoid voltage drop
• Environmental conditions of the installation site despite IP65 rating (e.g., prolonged immersion is not covered)
• Mechanical mounting and connector type required for your installation

Usage recommendations

For consistent results, plan pixel addressing and power injection points before installation. Use appropriate DMX terminators and weatherproof cable glands outdoors, and follow recommended spacing and mounting practices to maintain even light distribution along the 1 m tube.