Circular TCT Saw Blade Evolution EVO-230-40-D 230 mm, 40 teeth for wood cutting

Evolution EVO-230-40-D is a 230 mm tungsten carbide tipped (TCT) circular saw blade with 40 teeth, designed for general-purpose wood cutting. The blade is intended to provide a balance between cutting speed and edge finish, suitable for both crosscuts and rip cuts in softwood and hardwood. It is compatible with table saws, miter saws and circular saws that accept 230 mm diameter blades and performs consistently when used at recommended speeds and feed rates.

Advantages

The TCT tips extend blade life and maintain sharpness during repetitive cutting. With 40 teeth, the blade offers a compromise between smooth finish and efficient material removal, producing clean edges with minimal tear-out on most wood species. The 230 mm diameter yields a good depth of cut for common woodworking applications while keeping vibration and noise at manageable levels when properly mounted.

Suitable for

• Crosscutting softwood and hardwood
• Ripping boards and panels
• Table saw and miter saw woodworking tasks
• Circular saw operations where a 230 mm blade is required

Key specifications

• Blade diameter: 230 mm
• Tooth count: 40 teeth
• Tip material: tungsten carbide (TCT)
• Primary material: steel body with carbide-tipped teeth
• Intended cutting material: wood (softwood and hardwood)

How to use

Mount the blade on a compatible saw with correct arbor size and tightening torque, ensuring the saw is unplugged or the battery removed before installing. Verify blade rotation direction matches the saw's indicator and that blade guards and safety devices are in place. Set blade height and fence or miter angle according to the cut required. Feed workpieces at a steady rate appropriate for the wood species and thickness to avoid scorching or premature dulling of the carbide tips. Allow the blade to reach full speed before beginning each cut and support material to prevent kickback.

Usage recommendations

Use the blade for routine woodworking where a balance of finish and cutting speed is required. For the best life and finish, avoid cutting heavily resinous or metal-containing materials, and perform periodic inspection for chipped or worn carbide tips. When resharpening is necessary, use a qualified service that can restore tungsten carbide tips to factory geometry.