Interface Card EXSYS EX-41388 Internal Serial

The Exsys EX-41388 is an internal serial interface card designed specifically for PCI host systems, providing a reliable solution for serial communication. Equipped with the SystemBase 16C1058PCI chipset and an RS-232 interface, this controller card ensures stable data transfer for various connected peripheral devices. The device is built with standard dimensions of 120 mm in width and 61 mm in depth, with a total weight of 700 grams, and supports both 5V and 3.3V motherboard architectures. Included with the hardware is a dedicated serial cable to facilitate straightforward installation and immediate connectivity in compatible computer systems.

Advantages

The Exsys EX-41388 internal serial interface card delivers dependable performance through its robust SystemBase 16C1058PCI chipset and standard RS-232 serial interface. It supports flexible configuration options, allowing I/O addresses and interrupts to be set automatically or manually from the system BIOS with IRQ sharing support. Compatibility with both 5V and 3.3V motherboards ensures broad usability across different hardware generations. Additionally, the inclusion of a serial cable in the package reduces setup time and provides necessary components right out of the box, while CE and FCC certifications guarantee adherence to established international compliance and safety standards.

Suitable for

• Connecting legacy serial peripherals to PCI host systems
• Industrial automation and control setups requiring stable RS-232 communication
• Point-of-sale terminal equipment integration
• Data acquisition systems utilizing standard serial protocols

This product may not be suitable for modern computer systems that lack physical PCI expansion slots, as it requires a traditional PCI interface to function. It is also not designed for high-speed networking tasks or consumer interfaces that require USB, HDMI, or PCI Express connections.

Key specifications

• Host interface: PCI
• Output interface: Serial RS-232 V.24
• Chipset: SystemBase 16C1058PCI
• FIFO Buffer: 161050 with 256Byte
• Data bits: 5, 6, 7, 8
• Stop bits: 1, 1.5, 2
• Parity: None, even, odd, space, mark
• Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• Motherboard support: 5V and 3.3V
• Operating temperature range: 0 to 55 °C
• Physical dimensions: 120 mm width, 61 mm depth
• Weight: 0.7 kg
• Certifications: CE, FCC

To install the Exsys EX-41388, first power down the host computer and disconnect it from the electrical outlet. Open the computer case and insert the card firmly into an available PCI slot on the motherboard, securing it properly to the chassis. Connect the provided serial cable to the card and route it to your external serial device. Close the computer case, reconnect power, and start the system, then install any necessary drivers and configure the I/O addresses and interrupts through the system BIOS if required.

What to consider before purchase

• Verify that your computer motherboard features an available traditional PCI slot
• Confirm compatibility with your operating system and connected serial devices
• Check the physical dimensions to ensure proper fit within your computer case
• Ensure your application requirements match the RS-232 serial interface capabilities

Usage recommendations: Handle the interface card with standard electrostatic discharge precautions during installation. Ensure the system is completely powered off before inserting or removing the hardware, and verify that BIOS settings are correctly configured for IRQ sharing to achieve optimal serial communication stability.