Threading Die FANAR Narzynka M3.5 N1-121001-0035 for Cutting Metric M3.5 Threads

FANAR Narzynka M3.5 (threading die) is a tool for cutting external metric M3.5 threads on rods and bolts. Designed for both manual and machine operation, this die provides a dedicated solution for forming precise M3.5 threads in workshop, maintenance, and production environments. The tool is suitable where accurate external thread cutting is required for fastening and repair tasks.

Advantages

The FANAR Narzynka M3.5 delivers consistent thread profile and dimensional accuracy when used according to specifications. Its design supports both hand-held and machine-mounted operation, enabling flexible application across repair and production workflows. The die is compact and straightforward to install and align, which reduces setup time and helps maintain repeatable results.

Suitable for

• Cutting external metric M3.5 threads on rods and bolts
• Workshop and maintenance repairs
• Small-scale production and prototype threading
• Re-threading damaged fasteners to restore functionality

Key specifications

• Thread standard: metric external threads (M3.5)
• Application type: external threading for rods and bolts
• Operation: manual (with die stock) or machine-mounted use
• Intended use environments: workshop, maintenance, production

How to use

Secure the rod or bolt in a vise or appropriate holding fixture to prevent movement. If using a handheld die stock, fit the die into the stock and align it squarely with the workpiece; if using a machine mount, ensure proper seating and clamping. Apply cutting lubricant to the workpiece and start threading by applying steady, even pressure while turning the die. Periodically back off the die to clear chips and reapply lubricant as needed. After reaching the desired thread length, remove the die and clean the threaded area to remove swarf and lubricant residue.

Usage recommendations

For best results, use a compatible die stock or machine holder and appropriate cutting lubricant. Inspect the workpiece for straightness and correct diameter before threading and clear chips regularly to avoid workpiece or tool damage.