Saw blade FEIN 63502187210 Carbide 9 cm for Glass fibre reinforced plastic

The FEIN 63502187210 Carbide saw blade (9 cm) is designed for cutting glass fibre reinforced plastic (GFRP) and carbon fibre reinforced plastic (CFRP). The extra-thin, segmented carbide construction produces clean, distortion-free edges and long, straight cuts at high speed while minimising delamination. Cutting width is approximately 1.2 mm, making this blade suitable for precise edge and corner work without overcutting.

Advantages

Extra-thin carbide design reduces material removal and vibration for precision cuts. Segmented tooth layout allows controlled cutting in corners and along edges without overcutting. The carbide construction provides durability and maintains cutting performance when working with abrasive fibre-reinforced plastics. Fast cutting speed and a narrow kerf (approx. 1.2 mm) enable efficient, accurate results.

Suitable for

• Cutting glass fibre reinforced plastic (GRP/GFRP)
• Cutting carbon fibre reinforced plastic (CFRP)
• Making long, straight cuts and finishing edges without delamination
• Work on corners and narrow edge areas where overcutting must be avoided

Key specifications

• Brand: Fein
• Manufacturer part number (MPN): 63502187210
• EAN: 4014586390659
• Material: Carbide
• Diameter / length: 9 cm
• Cutting width (kerf): approx. 1.2 mm
• Design: Segmented, extra-thin blade for reduced delamination
• Intended use: Glass fibre reinforced plastic (fibreglass), carbon fibre reinforced plastic

How to use

Fit the FEIN 63502187210 saw blade to a compatible oscillating multi-tool or saw according to the tool manufacturer’s instructions and ensure secure attachment before operation. Mark the cut line on the workpiece and clamp the piece to prevent movement. Start the tool at low speed to position the blade, then increase to the appropriate cutting speed for fibre-reinforced plastics. Use steady, even pressure and allow the blade to cut without forcing to avoid overheating and fraying of fibres. For corner or edge work, make short controlled passes using the segmented sections.

Usage recommendations

Use appropriate personal protective equipment (safety glasses, dust mask/respirator and gloves) when cutting GFRP/CFRP to protect from dust and fibre splinters. Work in a well-ventilated area and consider dust extraction to reduce airborne particles. Replace the blade when cutting performance or finish quality declines.