Dusk-to-Dawn Photocell Switch FF AWZ 16A 230V 2–1000 lx IP65

FF AWZ is a dusk-to-dawn photocell switch designed for automatic control of lighting circuits. Rated for 16A at 230V, the device activates when ambient light falls below the set threshold and deactivates when brightness returns. The sensitivity is adjustable across a range from 2 to 1000 lux, allowing precise adaptation to local lighting conditions. With an IP65 enclosure, the unit is protected against dust ingress and low-pressure water jets, making it suitable for both outdoor and sheltered indoor installations.

Advantages

The FF AWZ photocell switch offers adjustable light sensitivity to match different installation needs without requiring additional sensors. Its 16A contact rating supports common lighting loads while operating on a standard 230V supply. The IP65-rated housing ensures reliable performance in exposed locations by protecting internal components from dust and moisture. The simple, compact design facilitates straightforward mounting and wiring in typical lighting circuits.

Suitable for

• Street and roadway lighting
• Façade and architectural illumination
• Garden and pathway lighting
• Entrance, doorway and stairwell outdoor lighting
• Automatic control of outdoor fixtures in commercial and residential settings

Key specifications

• Operating voltage: 230 V AC
• Maximum switching current: 16 A
• Sensitivity range: 2–1000 lux (adjustable)
• Ingress protection: IP65 (dust tight and protected against water jets)
• Function: dusk-to-dawn automatic switching based on ambient light

How to use

Install the photocell switch in a location representative of the ambient light level, away from direct illumination from the controlled fixture. Connect the device into the lighting circuit following standard electrical practice and local regulations, ensuring the supply is 230 V AC and the load does not exceed 16 A. Adjust the lux setting to the desired threshold within the 2–1000 lux range to determine when the lights switch on and off. After wiring and adjustment, test operation at dusk and dawn to confirm correct behavior.

Usage recommendations

Place the sensor where it receives unobstructed ambient light and is not affected by artificial light from the controlled fixtures. Ensure cable entries are correctly sealed and use appropriate mounting hardware for exposed installations to maintain IP65 protection. Periodically clean the sensor lens and check electrical connections to preserve reliable operation.