Screw anchor FISCHER 532728, plasterboard/GK wall plug, pack of 10

The Fischer GK Green gypsum plasterboard anchor is produced using at least 50% sustainable raw materials that do not compete with food or feed cultivation. The anchor matches the original product in performance and load-bearing capability and is supplied in a pack of ten. It is intended for fixing fixtures in gypsum plasterboard and accepts wood, sheet metal and chipboard screws with diameters of 4–5 mm as well as various hooks and eyes.

Advantages

The GK Green anchor offers simple, fast installation with a setting tool that allows pre-positioned insertion using a cordless screwdriver without preliminary drilling for board thicknesses up to 15 mm. Its short fixing length requires less space behind the board while providing high load capacity through positive-fit fixing. The design is suitable for series installation and the product is made with renewable raw materials.

Suitable for

• Mounting pictures and framed items on gypsum plasterboard
• Installing lights and small electrical fixtures
• Hanging small shelves, hooks, and decorative elements
• Fast, repeated installations in apartments or commercial interiors

When it may not be suitable

The anchor is designed for use in gypsum plasterboard and is not intended for solid masonry, concrete, or hollow block substrates. For board thicknesses above 15 mm preliminary drilling or an alternative fixing method may be required, and very heavy loads should be evaluated with appropriate anchors or mechanical fixings.

Key specifications

• Anchor type: gypsum plasterboard anchor (screw anchor / wall plug)
• Material composition: at least 50% renewable/sustainable raw materials
• Screw compatibility: accepts wood, sheet metal and chipboard screws Ø 4–5 mm
• Fixing length: short type — suitable where limited space behind board is available
• Board thickness for no-drill pre-positioned installation: up to 15 mm
• Pack quantity: 10 pieces

How to use

For pre-positioned installation, place the anchor in the desired position on the gypsum plasterboard and use the supplied setting tool with a cordless screwdriver to screw it in until it is flush with the surface. No preliminary drilling is necessary for boards up to 15 mm thick. After the anchor is set, insert a compatible screw (4–5 mm diameter) or hook and tighten to secure the fixture. Ensure the anchor is flush and correctly seated before applying the load.

What to consider before purchase

• Ensure the mounting surface is gypsum plasterboard and note the board thickness (suitable up to 15 mm without drilling).
• Choose compatible screws or hooks (recommended Ø 4–5 mm).
• Assess the expected load; use heavier-duty anchors for substantial weights.
• Verify available space behind the board for the short fixing length.

Usage recommendations

Use the supplied setting tool with a cordless screwdriver for consistent, flush installation; test a single anchor with the intended screw and load before completing series installations.