Wall plug anchors FISCHER 532741 SXR 8×60, long sleeve, pack of 10

The fischer frame fixing SXR is a high-quality nylon wall plug designed for fastening frames, timber substructures, coat racks and kitchen cabinets. Its special geometry allows use in both solid and hollow building materials. The SXR requires a low anchorage depth of 50 mm, which makes it economical for many installation tasks.

Advantages

The SXR plug combines an expandable section for solid materials with a self-anchoring behavior in hollow or perforated masonry, providing reliable fixation across different substrates. Made from durable nylon, it offers corrosion-resistant performance and consistent holding capability while keeping installation depth and material use minimal.

Suitable for

• Fixing timber substructures and frame elements
• Mounting coat racks or wall-mounted hooks
• Securing kitchen cabinets and shelving to masonry or drywall with cavities

When it may not be suitable

The SXR is intended for typical frame and fixture applications but may not be appropriate for extremely heavy structural loads or situations that require mechanical anchors rated for high shear or tensile forces. For use in very thin panels or non-standard substrates, alternative fasteners or additional reinforcement should be considered.

Key specifications

• Material: nylon
• Anchorage depth: 50 mm
• Designed application diameter: for screws of nominal size around 8 mm (specified plug-screw pairing)
• Suitable for: solid masonry and hollow/perforated building materials

How to use

Drill a hole of the appropriate diameter and depth for the SXR plug, clean out dust, insert the plug flush with the surface, and drive the matched screw until the fixture is secure. In solid materials the plug expands around the screw to form a friction fit; in hollow or perforated masonry the plug’s geometry allows it to anchor inside the cavity when the screw is tightened. Observe the recommended drill diameter and screw size for reliable fixation.

What to consider before purchase

• Verify substrate type (solid masonry vs. hollow/perforated) to ensure correct use
• Match screw diameter and length to the plug and required fixture thickness
• Confirm required anchorage depth (50 mm) is sufficient for the load and fixture

Usage recommendations

For consistent results use a drill bit that matches the plug diameter, remove drilling debris before insertion, and select screws recommended for frame fixings. For heavy or safety-critical loads choose anchors specifically rated for those conditions.