Screw & wall plug kit Fischer 534995 50 mm 8 pcs

The Fischer 534995 screw & wall plug kit includes eight anchors and matching screws designed for fixing into brick and concrete. Each plug measures 50 mm in length and is intended for use with a 10 mm drill bit; the recommended minimum hole depth is 60 mm. Supplied in a blister pack, the kit is compact for convenient storage and straightforward selection of the required fasteners on site.

Advantages

This screw and wall plug kit provides reliable load distribution in masonry and concrete substrates, supporting secure fastening for light- to medium-duty applications. The consistent 50 mm length simplifies selection and ensures adequate embedment depth when the specified drill diameter and hole depth are used. The blister packaging keeps components organized and reduces the risk of losing parts during transport or on the job.

Suitable for (tasks / use cases)

• Mounting shelving brackets and small cabinets to brick or concrete walls
• Fixing conduit clips, cable trays, and electrical boxes in masonry
• Installing handrails, towel rails, and lightweight fixtures in building interiors
• General repairs and maintenance tasks requiring anchors for solid substrates

Key specifications

• Quantity: 8 pieces per pack
• Plug length: 50 mm
• Recommended drill diameter: 10 mm
• Minimum hole depth: 60 mm
• Suitable base materials: brick, concrete
• Packaging type: blister

How to use

Mark the fixing positions and drill holes using a 10 mm masonry drill bit to a minimum depth of 60 mm. Clean the drilled holes from dust and debris before inserting the wall plugs flush with the substrate surface. Position the fixture, insert the screw through the item to be fixed and drive it into the plug until the fixture is held firmly; avoid over-torquing to prevent damaging the plug or substrate. Confirm secure anchorage by checking that the installed item does not move under expected loads.

Usage recommendations

Use the kit only in solid masonry or concrete. Do not use these plugs in hollow or soft materials without verifying suitability. For critical or heavy-load applications, consult load tables or choose an appropriate heavy-duty anchor system. Wear eye protection while drilling and follow standard safety procedures for power-tool use.