Fischer DUOPOWER 10 x 50 S anchor Metal Plastic 5 cm

Fischer DUOPOWER 10 x 50 S anchor is a two-component metal-plastic fixing designed for reliable fastening in a wide range of substrates. The grey nylon component adapts automatically to the base material by expanding, folding or forming a knot to achieve high load-bearing values, while the red expansion wings provide additional support. The preshaped edge on the plug head prevents the anchor from slipping into the drill hole and a serrated anti-rotation feature keeps the anchor steady during installation. This pack contains 4 anchors with a dowel length of 50 mm and a drill hole diameter of 10 mm, made in Spain.

Advantages

Two-component construction yields high holding capacity and an intelligent reaction to different substrates. The anchor gives clear tactile feedback when correctly installed, and its short length allows fast fixing without deep drilling. A narrow rim prevents the plug from slipping into the hole and serrations prevent rotation during insertion. For sizes 6 x 50, 8 x 65 and 10 x 80, increased anchorage depth improves performance in hollow materials, aerated concrete and for bridging plaster.

Suitable for (tasks / use cases)

• Fastening shelves, cabinets and light fixtures to solid masonry and concrete
• Fixings in aerated concrete and lightweight block materials
• Installations in hollow building materials where deeper anchorage is required
• General internal and external mounting where secure multi-substrate performance is needed

Key specifications

• Brand: FISCHER
• Model: DUOPOWER 10 x 50 S
• Material: Metal + plastic (nylon grey component)
• Dowel length: 50 mm
• Hole diameter: 10 mm
• Quantity: 4 pieces per pack
• Manufacturer part number (MPN): 534999
• EAN: 4048962237085
• Country of manufacture: Spain

How to use

Drill a hole with the recommended 10 mm drill bit to the required depth, clean the hole of dust, then insert the DUOPOWER anchor until the preshaped rim sits flush with the surface. Drive the appropriate screw into the anchor; the grey nylon component will activate and the red expansion wings will support secure expansion. Tighten the screw until you feel the anchor seated—do not overtighten. For hollow or lightweight materials, ensure correct anchor length and positioning to achieve adequate anchorage depth.

Usage recommendations

Use the DUOPOWER anchor together with screws of the correct diameter and length for the intended load and substrate. Always follow local building rules and the manufacturer’s installation guidance for load-critical applications.