Screw & wall plug kit Fischer 535001 40 mm 4 pcs

The Fischer 535001 screw & wall plug kit contains four 40 mm plastic anchors designed for secure fastening in solid materials such as brick and concrete. These anchors are intended for use with an 8 mm drill bit and require a minimum drill hole depth of 50 mm. The kit is suitable for a variety of light- to medium-duty mounting tasks around the home where a reliable mechanical anchoring solution is needed.

Advantages

These Fischer wall plugs are made to provide consistent expansion and load distribution in solid masonry, reducing the risk of pull-out under common loads. The 40 mm length gives sufficient embedment for improved holding power compared with shorter anchors, while the standard 8 mm diameter allows compatibility with widely available drill bits and matching screws. Supplied as a set of four, the kit is convenient for small repair and installation jobs without needing to purchase anchors individually.

Suitable for

• Fixing shelves and brackets to brick or concrete walls
• Mounting light fixtures and switch boxes in solid masonry
• Installing curtain rails or bathroom accessories on solid walls
• General repairs and DIY projects requiring mechanical anchors

Key specifications

• Anchor material: durable nylon/plastic suitable for masonry
• Anchor length: 40 mm
• Recommended drill diameter: 8 mm
• Minimum drill hole depth: 50 mm
• Package quantity: 4 pieces
• Intended substrate: solid masonry (brick, concrete)

How to use

Mark the fixing points and drill a straight hole with an 8 mm masonry drill to at least 50 mm depth. Clean the hole of dust and debris, then insert the 40 mm Fischer wall plug flush with the surface. Choose a screw appropriate to the anchor diameter and the load; drive the screw in until the fixture is secured and the anchor expands to grip the masonry. When installing multiple anchors for a single fixture, ensure even spacing and consistent embedment depth for uniform load distribution.

Usage recommendations

Use these anchors only in suitable solid substrates such as brick and concrete; they are not intended for use in hollow walls or weak substrates without additional specialist fittings. Select screws of the correct length to allow full expansion of the 40 mm anchor while avoiding overly long screws that could bottom out in the hole. For safety-critical or heavy-load installations, consult relevant load tables or a structural professional.