Screw hook & wall plug kit Fischer 535002 50 mm for Brick Concrete

The Fischer screw hook & wall plug kit 50 mm is a two-piece fastening solution designed for secure anchoring in brick and concrete. Each nylon wall plug measures 50 mm in length and is intended for use with a 10 mm drill bit, requiring a minimum hole depth of 60 mm. The kit pairs a durable screw hook with a matching plug to enable stable hanging and support of objects on solid masonry and concrete surfaces.

Advantages

The paired design—screw hook and matching wall plug—ensures correct load transfer into the substrate and reduces the risk of pull-out. High-quality plug material provides resistance to crushing and ensures consistent expansion inside drilled holes. The 50 mm length offers deeper anchorage for improved holding power in solid brick and concrete, while the standard 10 mm drill diameter simplifies installation with commonly available tools.

Suitable for

• Hanging light to medium fixtures on brick or concrete walls
• Mounting hooks for cables, plants or small shelving
• Securing bathroom accessories, towel rails or picture frames on solid masonry
• Indoor and sheltered outdoor installations on solid substrates

Key specifications

• Plug length: 50 mm
• Required drill diameter: 10 mm
• Minimum hole depth: 60 mm
• Number of kits per pack: 2 pieces (each kit includes one screw hook and one wall plug)
• Suitable substrate: brick and concrete (solid masonry)

How to use

Mark the desired fixing location and drill a 10 mm diameter hole to at least 60 mm depth suitable for solid brick or concrete. Clean the hole of dust and debris using a brush or blower. Insert the 50 mm wall plug flush with the surface, then screw the hook into the plug by hand or with a screwdriver until firmly seated. Ensure the hook is aligned as required before applying load. Follow load and spacing guidelines for multiple fixings to distribute weight evenly.

Usage recommendations

Use a hammer drill with a masonry bit for clean, straight holes in brick and concrete. Do not use the kit in hollow or lightweight block substrates without verifying suitability. For heavy loads or critical safety applications, consult technical data for allowable loads and consider using larger anchors or professional installation.