Screw & wall plug kit Fischer 535004 50 mm for Brick Concrete

The Fischer 535004 screw & wall plug kit contains two screw anchors and plugs designed for reliable fixing in brick and concrete. Each plug measures 50 mm in length and is matched to a 10 mm drill hole diameter with a minimum embedment depth of 60 mm. The kit is intended for use in construction and renovation environments where compact, robust anchoring is required for fixtures that need secure attachment to masonry substrates.

Advantages

This screw and wall plug kit offers a compact two-piece solution that combines a durable plug body with a compatible screw anchor to provide stable load transfer into brick and concrete. The 50 mm plug length ensures adequate engagement in medium-thickness masonry while the 10 mm hole diameter specification supports consistent drilling and installation. The components are pre-matched for straightforward selection and reduce the risk of incorrect combinations during typical fastening tasks.

Suitable for

• Fixing small to medium-weight fixtures to brick walls
• Mounting shelves, brackets or fittings on concrete
• General renovation and repair tasks in masonry

Key specifications

• Plug length: 50 mm
• Required drill hole diameter: 10 mm
• Minimum drill depth / embedment: 60 mm
• Package quantity: 2 pieces
• Compatible substrate types: brick, concrete

How to use

Drill a 10 mm diameter hole to at least 60 mm depth into the brick or concrete at the planned fixing location. Clean the hole from dust and debris before inserting the plug fully until its head sits flush with the surface. Drive the matched screw anchor into the plug using an appropriate screwdriver or drill at low speed, taking care not to over-torque. Ensure the fixture is aligned as the screw is tightened and verify that the anchor engages securely within the substrate.

Usage recommendations

For optimal performance, use a hammer drill with a 10 mm masonry bit for drilling in concrete and hard brick. Remove dust from the hole with a brush or compressed air prior to insertion. Do not exceed recommended embedment depth and choose screw length appropriate for the fixture thickness to maintain full engagement of the plug in the masonry.