Screw & wall plug kit Fischer 535005 30 mm 4 pcs

The Fischer 535005 screw & wall plug kit contains four 30 mm nylon wall plugs designed for secure anchoring in solid masonry such as brick and concrete. Intended for general household and light construction fastening tasks, the kit is compatible with Ø6 mm drill holes and requires a minimum embedment depth of 40 mm to achieve recommended holding values. The plugs are suitable for use with corresponding screws to fasten fixtures, brackets, and fittings where a reliable mechanical connection in solid substrate is needed.

Advantages

The wall plugs are made from durable nylon that resists cracking and provides stable expansion in solid materials. Their geometry ensures an even distribution of load along the plug length, improving pull-out performance in brick and concrete. The 30 mm length is optimized for typical household fixings, balancing embedment depth with practical drill-hole requirements. The kit format of four plugs offers a simple, ready-to-use supply for small mounting jobs.

Suitable for

• Fixing shelves and wall-mounted storage brackets to brick or concrete
• Mounting light fixtures, towel rails, and curtain poles in solid masonry
• Securing small cabinets and bathroom accessories to solid walls
• General household repairs and DIY mounting tasks in masonry

Key specifications

• Plug material: nylon (plastic)
• Plug length: 30 mm
• Recommended drill diameter: 6 mm
• Minimum embedment depth: 40 mm
• Quantity in kit: 4 pieces
• Suitable base materials: solid masonry (brick, concrete)

How to use

Drill a Ø6 mm hole to at least 40 mm depth in the solid masonry surface. Clean the hole from dust and debris before inserting the plug to ensure proper expansion. Insert the nylon plug flush with the wall surface and then drive a compatible screw into the plug until the fixture is firmly secured. Avoid over-tightening, which can damage the plug or reduce holding capacity. For each application confirm the screw diameter and length match the plug dimensions and the thickness of the item being fastened.

Usage recommendations

Use the kit only in solid masonry; do not use these plugs in hollow or perforated blocks without verifying suitability. For heavy loads or critical fixings, select a fastening system rated for the expected load and follow relevant installation standards. When in doubt about substrate condition or load requirements, consult technical guidance or a qualified installer.