Screw & wall plug kit Fischer 535006 40 mm 2 pcs

The Fischer 535006 screw & wall plug kit contains two screw anchors designed for secure fixing in masonry and concrete. Each wall plug measures 40 mm in length and is intended for use with an 8 mm drill bit; the recommended minimum drill hole depth is 50 mm. The kit comes in a blister pack for convenient storage and handling, providing the basic components needed for light to medium fastening tasks in residential and professional settings.

Advantages

These screw anchors offer reliable anchoring in brick and concrete due to their shape and material properties. The 40 mm length provides sufficient embedment depth for many standard fixtures while the specified 8 mm drill hole diameter ensures compatibility with commonly available drill bits. The blister pack keeps the contents visible and protected, simplifying selection and transport on the job site.

Suitable for

• Securing shelves, small cabinets and light fittings to brick or concrete walls
• Mounting conduit clips, cable brackets and small fixtures in masonry
• Indoor and sheltered outdoor use where masonry or concrete substrate is present

Key specifications

• Pack quantity: 2 pieces
• Plug length: 40 mm
• Recommended drill bit diameter: 8 mm
• Minimum drill hole depth: 50 mm
• Suitable substrates: brick, concrete
• Packaging type: blister pack

How to use

Mark the mounting points on the masonry surface, then drill holes with an 8 mm masonry bit to a depth of at least 50 mm. Clean the drilled holes of dust and debris before inserting the wall plugs fully into the cavity. Position the fixture and drive the appropriate screw into the plug until the fixture is securely fastened; ensure the screw length matches the combined thickness of the fixture and the plug embedment depth. Check the stability of the mounted item and tighten as required without over-torquing.

Usage recommendations

Use the kit only on compatible substrates such as solid brick and concrete. For hollow or lightweight materials, choose a fixing system designed for those substrates. Select screw length and head type appropriate to the fixture; avoid excessive torque when tightening to prevent damage to the plug or substrate.