Screw & wall plug kit Fischer 537650 50 mm 8 pcs

The Fischer 537650 screw & wall plug kit contains eight 50 mm anchors designed for secure fixing in brick and concrete. Each anchor is intended for use with a 6 mm diameter drill hole and requires a minimum embedding depth of 60 mm. The kit is supplied in a transparent blister pack that keeps components organised and accessible for small installation tasks and repairs around the home.

Advantages

The kit combines matching screws and wall plugs sized for consistent performance in masonry substrates. The 50 mm anchor length provides sufficient embedment for medium-duty fixings while the 6 mm drill hole requirement ensures accurate hole preparation and reliable load transfer. The blister packaging allows quick visual inventory and easy transport to the work site.

Suitable for

• Fixing shelves and small cabinets to brick or concrete walls
• Mounting curtain rails, hooks and picture frames in masonry
• Light to medium household repairs and installations
• Temporary or permanent attachments where 50 mm embedment is appropriate

Key specifications

• Anchor length: 50 mm
• Number of pieces: 8
• Recommended drill diameter: 6 mm
• Minimum embedment depth: 60 mm
• Suitable substrates: brick, concrete
• Packaging: blister pack for storage and transport

How to use

Mark the fixing positions on the masonry surface, then drill holes with a 6 mm masonry drill to a depth of at least 60 mm. Clean the drilled holes of dust and debris before inserting the wall plugs fully into the holes. Position the fixture, insert matching screws through the fixture into the plugs and tighten to secure the fitting without over-torquing. Ensure the chosen screw length provides proper engagement while leaving no excessive protrusion.

Usage recommendations

For best results, use with a correctly sized masonry drill bit and clean the hole with a brush or compressed air. Do not use these anchors in hollow or weak substrates; choose specific hollow-wall anchors if mounting to drywall or hollow blocks. Check load requirements of the application and, if in doubt, consult manufacturer guidance or a qualified installer for structural or safety-critical fixings.