Screw & wall plug kit Fischer 537665 60 mm for Brick Concrete

The Fischer 537665 screw & wall plug kit provides two complete fasteners engineered for reliable anchoring in brick and concrete. Each wall plug measures 60 mm in length and is matched to screws for secure installation. The kit is suitable for medium-duty fixtures where solid anchoring and long-term stability are required.

Advantages

The design of the wall plugs ensures a stable hold in masonry and dense concrete while minimizing splitting and surface damage. A specified drill hole diameter and recommended drill depth improve installation accuracy and repeatability. Supplied as a matched pair of screw and plug, the kit simplifies selection and reduces the risk of mismatch between fastener and anchor.

Suitable for

• Mounting shelves and cabinets to brick or concrete walls
• Fixing light to medium-weight fixtures such as brackets and conduit clips
• Securing electrical boxes and small utility fittings
• Indoor and sheltered outdoor masonry fastening

Key specifications

• Anchor type: wall plug with matching screw
• Plug length: 60 mm
• Recommended drill hole diameter: 12 mm
• Minimum drill hole depth: 85 mm
• Quantity: 2 pieces per kit
• Intended base materials: brick, concrete

How to use

Mark the fixing position on the masonry surface and drill a hole with a 12 mm drill bit to at least 85 mm depth. Clean the hole from dust and debris before inserting the wall plug flush with the face of the material. Place the fixture over the plug, insert the matching screw and tighten to the required torque for the application without overdriving. Verify the anchor holds securely before loading the fixture.

Usage recommendations

Use a hammer drill for dense concrete, and always check the substrate condition before drilling. For heavy loads or hollow substrates, select a specialist anchor system. Store the kit in a dry place and follow local building codes and safety practices during installation.