Screw & wall plug kit Fischer 537666 70 mm for Brick Concrete

The Fischer 537666 screw & wall plug kit contains two anchors specially designed for secure fastening in brick and concrete. Each anchor has a length of 70 mm and requires a drill hole diameter of 14 mm with a minimum drill depth of 100 mm. The kit is intended for solid masonry substrates and provides a stable mechanical connection for fixtures and fittings in residential and light-commercial settings.

Advantages

The anchors offer reliable load transfer in solid masonry, minimizing movement and ensuring long-term stability. The 70 mm anchor length provides sufficient embedment in brick and concrete to support medium loads while maintaining a compact installation footprint. Designed for straightforward installation, the kit reduces fitting time and helps achieve consistent results across multiple anchor points.

Подходит для

• Крепление полок и шкафов к кирпичу и бетону
• Монтаж сантехники и светильников
• Фиксация кронштейнов и конструктивных элементов
• Закрепление декоративных панелей и карнизов

Key specifications

• Anchor type: screw anchor with matching wall plug suitable for solid masonry
• Anchor length: 70 mm
• Required drill hole diameter: 14 mm
• Minimum drill hole depth: 100 mm
• Quantity: 2 pieces per kit
• Recommended substrate: brick, solid concrete

How to use

Mark the fixing points on the masonry, then drill a hole to the specified diameter and minimum depth. Clean the drilled hole from dust and debris before inserting the wall plug. Position the anchor and tighten the screw until the fixture is held firmly against the substrate; avoid over-tightening to prevent damage to the plug or surrounding material. Check the fixed element for stability and adjust if necessary.

Usage recommendations

Use a hammer drill with an appropriate masonry bit and a brush or blower to remove drilling debris. For load-bearing or safety-critical applications, verify anchor spacing, edge distances and substrate condition, and consult relevant standards or a structural professional if required.