Screw & wall plug kit Fischer 567828 5 pcs Nylon for concrete brick

The Fischer 567828 screw & wall plug kit contains five nylon SX Plus expansion plugs designed for secure fixing in solid and perforated building materials such as concrete, brick and masonry. Each plug is matched with suitable screws and requires a drill diameter of 10 mm and a minimum drill depth of 70 mm; the recommended screw diameter is at least 7 mm. The high-quality nylon construction provides durable holding strength and the plug profile facilitates easy insertion and reliable anchoring.

Advantages

The SX Plus plug features a 4-way expansion that transfers force evenly into the base material to achieve high load values in solid and perforated substrates. Special fixing wings pre-fix the screw in the plug, leaving both hands free during installation and preventing the screw from falling out, which is useful for overhead work. An expansion-free plug neck prevents surface stresses while tightening the screw, reducing the risk of damage to tiles or plaster. The plug’s shaped body allows easy insertion into the drill hole with a few hammer taps, and a pronounced collar prevents the plug from slipping into the hole. A clear tightening torque indicates when the screw is properly seated, helping to avoid overtightening.

Suitable for

• Concrete and reinforced concrete
• Brickwork and masonry
• Sand-lime brick and aerated concrete where compatible with specified drill diameter and depth
• Indoor fixtures requiring nylon anchors with screw diameters from 7 mm

Key specifications

• Brand: FISCHER
• Model / MPN: 567828
• Contents: 5 nylon SX Plus expansion plugs (with matching screws)
• Drill diameter: 10 mm
• Minimum drill depth: 70 mm
• Recommended minimum screw diameter: 7 mm
• Material: high-quality nylon
• EAN: 4042205423327

How to use

Drill a hole with the specified 10 mm diameter to at least 70 mm depth, clean the hole of dust, and insert the SX Plus plug flush with the surface. For pre-positioned applications, push the screw into the plug—the fixing wings will fold inward and hold the screw in place. For push-through installation, insert the plug and then fasten the fixture with the appropriate screw. Tighten the screw until the plug expands in four directions and the recommended tightening torque is reached; this expansion anchors the plug in the base material.

Usage recommendations

Use screws with a diameter of at least 7 mm and lengths that equal plug length plus fixture thickness plus the screw diameter. Do not use the plugs in materials or thicknesses that do not meet the stated drill diameter and minimum depth requirements. For load-critical or safety-relevant fixings consult relevant technical data sheets or a structural engineer.