Screw & wall plug kit Fischer 567829 3 pcs 60 mm Nylon

The Fischer 567829 screw & wall plug kit contains three nylon SX Plus expansion plugs with matching screws, each 60 mm long and 12 mm in diameter. Designed for fixing in solid and perforated building materials, the plugs provide secure anchoring for a range of construction and repair tasks. The kit is suitable for pre-positioned and push-through installation and is supplied by FISCHER for general fastening needs.

Advantages

The 4-way expansion converts screw torque into uniform radial forces in the base material, ensuring high load-bearing values in concrete, sand-lime brick and masonry. Special fixing wings pre-fix the screw in the plug so the screw remains held in place during setting, which is useful for overhead installation. The plug neck is expansion-free, preventing surface pressure on tiles and plaster while the screw is driven in. An optimized plug shape allows easy insertion into the drilled hole with a few light hammer blows, and a pronounced plug edge prevents the plug from slipping deeper into the hole. A noticeable tightening torque signals proper installation and helps avoid overtightening.

Suitable for

• Fixing fixtures to concrete and masonry
• Mounting in sand-lime brick and perforated blocks
• General repairs and installations requiring reliable anchors

Key specifications

• Brand: FISCHER
• Model / MPN: 567829
• Contents: 3 expansion plugs with matching screws
• Plug material: Nylon
• Plug length: 60 mm
• Plug diameter: 12 mm (1.2 cm)
• EAN: 4048962481556

How to use

Drill a hole of the correct diameter and depth for the 60 mm plug, clean the hole of dust, then insert the SX Plus plug until the pronounced edge sits flush with the surface. For pre-positioned installation, insert the screw into the plug so the fixing wings fold inward and hold the screw. For push-through installation, push the plug through the fixture into the hole and then drive in the screw. Tighten the screw until the increased tightening torque indicates the plug has expanded and anchored in the material; avoid further tightening to prevent damage.

Usage recommendations

Use the kit in materials recommended for SX Plus anchors (concrete, sand-lime brick, masonry). Choose a drill bit that matches the plug diameter and ensure hole depth equals plug length plus any expected debris. For thin or fragile finishes (tiles, plaster), rely on the expansion-free neck to minimize surface pressure, and stop tightening when firm resistance is felt.