Screw & wall plug kit Fischer 567867 5 pcs 50 mm Green

The Fischer SX Plus Green screw and wall plug kit contains five green SX Plus expansion anchors, each 50 mm long and 10 mm in diameter. Made from at least 50% renewable raw materials, these plugs are designed for secure fixing in a variety of substrates including concrete, brick, autoclaved aerated concrete, gypsum block and masonry. The kit includes screws that are matched to the plugs to provide reliable fastening performance for domestic and light-construction applications.

Advantages

The SX Plus Green is produced with at least 50% renewable raw materials, reducing the use of fossil-based plastics. Its 4-way expansion ensures even force transmission into the building material and provides high holding values in both solid and perforated substrates. Special fixing blades pre-fix the screw and keep it in place, leaving both hands free during setting. An expansion-free plug neck prevents surface expansion forces while screwing in, minimising the risk of damage to tiles and plaster. The plug’s shaped body allows easy insertion into the drill hole with a few light hammer blows, and the pronounced plug edge prevents the anchor from slipping deeper into the hole for secure installation.

Suitable for

• Fixing shelves, cabinets and light fixtures to concrete and masonry
• Mounting fittings and brackets in brick and aerated concrete
• General interior and exterior fastening where matched screws and plugs are required

Key specifications

• Plug type: SX Plus expansion anchor
• Material composition: at least 50% renewable raw materials
• Length: 50 mm
• Outer diameter: 10 mm
• Expansion: 4-way expansion for solid and perforated substrates
• Installation modes: pre-positioned and push-through
• Included: 5 plugs with matching screws

How to use

Drill a hole of the correct diameter and depth for the 10 mm SX Plus plug, clean the hole of dust, insert the plug either pre-positioned or push-through and, if necessary, tap it in with light hammer blows until the pronounced edge sits on the surface. Insert the matching screw; the fixing blades will fold inwards to pre-fix the screw. Tighten the screw to secure the plug: the SX Plus Green will expand in four directions to anchor in the base material. Avoid overtightening once the anchor holds firmly.

Usage recommendations

Use the kit for medium-duty fixings in suitable building materials listed above. For load-critical or safety-relevant installations, follow applicable standards and manufacturer's load tables and choose anchors and screw sizes appropriate for the specific load and substrate.