Screw & wall plug kit Fischer 567869 Green 3 pcs 1.2 cm drill hole

The fischer SX Plus Green screw and wall plug kit contains three expansion anchors produced with at least 50% renewable raw materials. Designed for solid building materials such as concrete, sand-lime brick and masonry, the SX Plus Green combines a 4-way expansion with a rotation lock and special fixing blades to provide secure anchoring and easy handling. The kit includes screws matched to the plugs and is supplied in a blister pack; each anchor requires a 1.2 cm drill hole and a minimum embedment depth of 8 cm.

Advantages

The SX Plus Green is manufactured from at least 50% renewable raw materials, reducing environmental impact. Its 4-way expansion ensures even force transmission into solid and perforated substrates for high holding values. Special fixing blades pre-fix the screw so it stays in place during setting, freeing both hands for installation. The expansion-free plug neck prevents surface stresses while screwing, helping to avoid damage to tiles and plaster. A pronounced plug edge prevents the anchor from slipping deeper into the drill hole, and the plug’s shape allows easy insertion with a few light hammer blows.

Suitable for

• Concrete
• Sand-lime brick
• Masonry
• Autoclaved aerated concrete (lightweight concrete)

Key specifications

• Brand: FISCHER
• Model / MPN: 567869
• Contents: 3 SX Plus Green anchors with matching screws
• Drill hole diameter: 1.2 cm
• Minimum embedment depth: 8 cm
• Packaging: blister
• EAN: 4048962481952

How to use

Drill a hole with a 1.2 cm diameter to at least 8 cm depth in the chosen substrate. Clean the drill hole of dust and debris. Insert the SX Plus Green plug into the hole — its shape and pronounced edge make it easy to place with a few hammer blows if needed. For pre-positioned or push-through installation, insert the screw; the fixing blades will fold inward to pre-fix the screw and prevent it from falling out. Tighten the screw until the plug expands in four directions and anchors securely in the building material. Do not exceed the recommended tightening torque for the chosen screw and substrate.

Usage recommendations

Check substrate suitability and follow the specified drill diameter (1.2 cm) and minimum embedment depth (8 cm). Use the supplied screws or screws with equivalent dimensions and strength. For safety-critical or load-bearing applications, consult relevant technical data sheets or a structural engineer to verify permissible loads and correct installation method.