Forankra two-layer looped lifting sling, webbing, 3 t capacity, 1.5 m length

Forankra two-layer looped lifting sling, webbing, 3 t capacity, 1.5 m length is a textile lifting sling designed as a closed loop for vertical and multi-leg lifting operations. Constructed from two-layer polyester webbing, the sling provides a defined rated capacity of 3 tonnes and a working length of 1.5 metres. Its looped design enables direct attachment to hooks, shackles or lifting points and supports general lifting, load securing and material handling tasks in workshops, warehouses and on construction sites.

Advantages

The two-layer webbing construction increases abrasion resistance and distributes load evenly across the sling. The closed loop format eliminates the need for additional terminations, simplifying connection to hooks and shackles. Lightweight and flexible textile material reduces damage to fragile surfaces compared with wire or chain slings, while retaining the rated lifting capacity for standard vertical lifts. The sling is suitable for repeated handling and storage in confined spaces due to its compact, foldable form.

Suitable for

• Vertical lifting of loads up to the rated capacity
• Multi-leg lifting assemblies when combined with appropriate hardware
• Material handling and load transfers in workshops and warehouses
• Temporary load securing during transport and repositioning
• Lifting of finished parts and components with surfaces sensitive to abrasion

Key specifications

• Rated capacity: 3 tonnes (vertical lift)
• Working length: 1.5 m
• Construction: two-layer woven polyester webbing, looped/closed-eye
• Shape: continuous loop for direct attachment
• Intended use: vertical and multi-leg lifting, load securing, material handling
• Handling properties: flexible, lightweight, foldable for compact storage

How to use

Before each use inspect the sling for visible damage, cuts, tears, chemical staining or excessive abrasion and verify that its rated capacity and length match the lifting requirements. Position the loop around the load or pass it through the load attachment, then connect to the lifting hook or shackle ensuring proper seating and absence of twists. For multi-leg lifts assemble slings and lifting hardware according to the planned sling angle and rated capacities to avoid overload. Lift steadily and avoid shock loading. After use, clean contaminants from the sling, allow it to dry, and store it protected from sunlight and chemicals.

Usage recommendations

Use the sling only within its rated capacity and recommended configurations. Do not expose the webbing to sharp edges without suitable edge protection, strong acids, alkalis or open flames. Replace the sling if any damage, permanent deformation or significant loss of material integrity is detected. When using with hooks or shackles ensure compatibility of hardware and follow local lifting regulations and safe working procedures.