FTE Quad Converter eXcellento Black LTEv 0.1 dB, FTE 20710

The FTE Quad Converter eXcellento Black LTEv 0.1 dB is a compact quad-output satellite LNB designed to deliver low-noise signal conversion for DVB-S and DVB-S2 reception. Built to feed up to four satellite tuners at the same time, this converter integrates LTE filtering to reduce interference from mobile networks and offers a 0.1 dB noise figure for improved sensitivity in residential and small commercial installations.

Advantages

This quad LNB provides four independent outputs allowing simultaneous connection of multiple receivers or a multiswitch. Its low 0.1 dB noise figure helps maintain signal quality, especially in locations with weaker satellite signals. The integrated LTE filter reduces the risk of interference from nearby cellular transmitters. The compact, weather-resistant housing is suitable for outdoor mounting on standard satellite dishes and is compatible with common DiSEqC and single-cable setups.

Suitable for

• Multi-receiver home satellite systems (up to four tuners)
• Apartments and multi-room installations requiring independent satellite feeds
• Small commercial installations such as waiting rooms, bars or offices
• Setups where mobile network interference is a concern

Key specifications

• Type: Quad-output Ku-band satellite LNB
• Noise figure: 0.1 dB
• Outputs: 4 independent F-type outputs for LNB-to-receiver connection
• LTE filter: Integrated to suppress mobile network interference
• Compatibility: DVB-S and DVB-S2 receivers
• Housing: Weather-resistant outdoor design for dish mounting

How to use

Mount the LNB on the dish arm using the existing clamp or adapter, ensuring correct alignment with the satellite focal point. Connect each F-type output to a separate satellite receiver or to the inputs of a compatible multiswitch using quality coaxial cables and connectors. Power is supplied through the receiver via the coaxial cable; check receiver settings for 13/18 V and 22 kHz switching if you use a motorized or band-switching configuration. After physical installation, perform a signal scan and fine-tune dish alignment for optimal signal strength and quality.

Usage recommendations

Use low-loss, well-shielded RG6 or equivalent coaxial cable and corrosion-resistant F-type connectors to preserve the 0.1 dB noise performance. Position the dish with clear line-of-sight to the satellite and avoid nearby sources of RF noise. Periodically inspect weather seals and connectors for moisture ingress to maintain long-term reliability.