G_B_FISSAGGI Nylon Sleeve for Chemical Anchor CB02 Size 16x130 mm

The G&B Fissaggi nylon sleeve model CB02, sized 16x130 mm, is designed for use with chemical anchors in both hollow and solid masonry substrates. This essential fixing component ensures secure and reliable load distribution during installation processes in construction and renovation projects. Manufactured by G&B Fissaggi, each pack contains 10 pieces of durable plastic sleeves tailored to enhance the stability of threaded rods and studs when anchoring into challenging base materials.

Advantages

The G&B Fissaggi nylon sleeve provides exceptional performance by centralizing the threaded element within the drilled hole, ensuring optimal resin consumption and uniform load transfer. Its robust plastic construction resists chemical degradation from injection mortars while bridging voids in perforated or hollow bricks effectively. By utilizing this sleeve, installers achieve a dependable mechanical and chemical bond that significantly increases pull-out resistance compared to standard fixings without sleeves. The standardized dimensions of 16x130 mm allow for consistent application across various professional and DIY building tasks.

Suitable for

• Installing heavy fixtures in hollow brick and perforated masonry
• Securing threaded studs and rods with chemical anchors in solid concrete or stone
• Renovation and construction projects requiring reliable void-filling fixings
• Mounting handrails, brackets, and structural supports where standard plugs fail

When it may not be suitable

This nylon sleeve is not recommended for solid substrates where a chemical anchor can be applied directly without a mesh or perforated sleeve, as it may be unnecessary. It is also unsuitable for applications exposed to continuous temperatures exceeding the operational limits of standard engineering plastics.

Key specifications

• Brand: G&B Fissaggi
• Model: CB02
• Length: 130 mm
• Diameter: 16 mm
• Material: Plastic
• Quantity per pack: 10 items

How to use

To use the G&B Fissaggi nylon sleeve, first drill a hole into the masonry substrate matching the required diameter and depth. Clean the drilled hole thoroughly using a brush and blow-out pump to remove all dust and debris, as dust reduces the adhesion of the chemical mortar. Insert the nylon sleeve fully into the prepared hole. Next, inject the chemical anchor resin into the sleeve starting from the bottom, filling it sufficiently to embed the fastener properly. Finally, insert the threaded rod or stud into the sleeve with a slow twisting motion until it reaches the desired depth, and allow the chemical mortar to cure completely according to the manufacturer instructions before applying any load.

What to consider before purchase

• Verify that the hole diameter and depth match the 16x130 mm dimensions of the sleeve
• Ensure compatibility with your chosen chemical anchor injection resin
• Check that the substrate material consists of hollow or solid masonry suitable for sleeved chemical fixings
• Confirm that the quantity of 10 items meets the requirements of your specific project

Always wear appropriate personal protective equipment during installation and adhere strictly to the curing times specified by the chemical mortar manufacturer to ensure maximum structural integrity.