Inspection Camera GEKO Endoskop 5.5mm (100) — borescope camera with 5.5 mm probe

GEKO Endoskop 5.5mm (100) is an inspection camera with a 5.5 mm diameter probe designed to provide visual access to narrow, hard-to-reach spaces. The borescope camera delivers real-time images for close inspection of pipes, engine compartments, HVAC channels, machinery interiors, and building cavities. Its slim probe and integrated optics enable detection of blockages, corrosion, wear, leaks, and foreign objects during maintenance and diagnostic tasks for both professional technicians and DIY users.

Advantages

The compact 5.5 mm probe allows access through small openings and tight bends where larger cameras cannot fit. The camera produces clear, magnified views of internal surfaces, helping to pinpoint faults without disassembly. Designed with practical handling in mind, the device supports visual diagnostics in confined spaces and reduces time and effort required for inspection work.

Suitable for

• Inspection of pipes, drains and sewers
• Visual checks inside engines, gearboxes and transmissions
• HVAC duct and vent examinations
• Inspection of building cavities, behind walls and in floors
• Maintenance checks on industrial machinery and equipment

When it may not be suitable

The GEKO Endoskop 5.5mm probe is intended for visual inspections only and does not perform measurements such as pressure, temperature, or electrical diagnostics. The small probe diameter may limit light gathering in extremely dark or highly reflective environments; supplemental external lighting or an imaging unit with higher sensitivity may be required for very low-light conditions. It is also not designed for immersion to significant depths unless specified by the manufacturer.

Key specifications

• Probe diameter: 5.5 mm
• Probe length: suitable for reaching confined spaces — length varies by configuration
• Camera type: borescope inspection camera with integrated lens
• Image output: real-time visual feed for direct inspection
• Compatibility: suitable for handheld inspection setups and connection to compatible display or recording devices
• Intended use: non-destructive visual inspection of tight or enclosed areas

How to use

Insert the 5.5 mm probe carefully into the inspection opening and advance slowly while observing the live image to avoid contact damage to the probe or the inspected component. Adjust angle and position gently to obtain clear views of surfaces and features of interest. If the unit supports lighting control, increase or decrease illumination to reduce glare or reveal detail. After inspection, withdraw the probe, clean it according to the manufacturer’s instructions, and store the device in a protective case to prevent damage.

What to consider before purchase

• Verify probe length and flexibility meet the reach requirements for your tasks
• Check compatibility with your preferred display or recording equipment
• Consider lighting performance for inspections in very dark environments
• Confirm whether the camera supports waterproofing if you need liquid-immersed inspections

Usage recommendations

For best results, use steady, controlled movements and moderate illumination. When inspecting delicate or sensitive components, protect surfaces with a soft guide or sleeve and avoid forcing the probe through tight passages. Regularly clean and inspect the probe after use to maintain image quality and extend service life.