Battery Terminal Clamps GEKO G02400 set of 2 (+ and -) for car batteries

Set of two GEKO battery terminal clamps designed to replace or repair worn or corroded positive and negative connections on standard car batteries. The GEKO G02400 set includes one clamp for the positive post and one for the negative post, providing a secure mechanical and electrical connection for starter and charging circuits. Constructed for compatibility with common battery post sizes, these clamps are intended for straightforward installation and reliable conductivity in everyday automotive use.

Advantages

The GEKO battery terminal clamps offer a compact replacement solution that restores solid contact and reduces voltage loss caused by corroded or loose terminals. Their metal construction ensures good electrical conductivity and mechanical strength while the set format includes both positive and negative clamps for a complete terminal renewal. The clamps are compatible with standard car battery posts, enabling fast swap-out without the need for specialized tools.

Suitable for

• Replacement of worn or corroded battery terminals on passenger cars
• Repairing poor electrical contact causing starting or charging issues
• Routine vehicle maintenance and battery servicing
• DIY automotive electrical work where standard post clamps are required

Key specifications

• Set contents: two clamps — one for positive (+) and one for negative (−) battery posts
• Compatibility: designed for standard car battery post diameters
• Material: conductive metal alloy for electrical contact and mechanical durability
• Connection type: bolt or screw fastening for cable attachment and terminal clamping
• Finish: corrosion-resistant plating or coating to prolong service life

How to use

Ensure the vehicle ignition is off and disconnect the battery following safety precautions, removing the negative terminal first. Remove the old clamps, clean the battery posts of heavy corrosion or residue, and place the new GEKO clamps onto the corresponding positive and negative posts. Tighten the clamp bolts to secure the clamps to the battery posts and attach the battery cables to the clamp connection points, then retighten as needed. Reconnect the battery, connecting the positive terminal first and the negative last, and verify proper electrical contact and vehicle start-up.

Usage recommendations

Before installation, inspect battery posts and cable ends for severe corrosion; use a wire brush and appropriate cleaning solution if necessary. Torque clamp fasteners to a firm hand-tight level—avoid over-tightening which can damage posts. Periodically check clamps for corrosion and tightness as part of regular vehicle maintenance.