Drill Bit GRAPHITE SDS MAX 28 mm model 57H534
Excellent choice
Short description
Cheapest delivery:
Latvijas Pasts nodaļa
Product information
Description
GRAPHITE SDS MAX 28 mm drill bit model 57H534 is a rotary/percussion drilling accessory designed for SDS MAX-compatible hammer drills and rotary hammers. With a 28 mm cutting diameter and a robust shank for SDS MAX chucks, this bit is intended for drilling larger-diameter holes in concrete, masonry and natural stone. The construction balances impact resistance and drilling efficiency for use in construction, renovation and installation tasks where reliable masonry drilling is required.
Advantages
The SDS MAX design ensures secure retention and efficient power transfer from hammer drill to cutting head, reducing chisel-out and wobble during heavy-duty work. A 28 mm diameter provides the capacity to create anchor, conduit and fastening holes without multiple passes. The tip and flute geometry are optimized for debris removal and stable drilling under impact loads, while the hardened shaft and carbide-tipped cutting edges improve wear resistance and lifetime when used in abrasive masonry materials.
Suitable for
- Drilling anchor holes in concrete and reinforced concrete
- Creating openings for electrical conduits and plumbing fixtures
- Installing mechanical fasteners and chemical anchors
- General masonry drilling in brick, block and natural stone
Key specifications
- Shank type: SDS MAX compatible
- Cutting diameter: 28 mm
- Intended materials: concrete, masonry, natural stone
- Drilling mode: rotary with percussion (hammer drilling)
- Typical use: professional and construction applications
How to use
Select an SDS MAX rotary hammer or demolition drill that accepts SDS MAX bits. Secure the bit into the chuck according to the tool manufacturer's instructions until it locks. Mark and, if necessary, center-punch the drilling location. Use the hammer drilling mode for concrete and masonry, applying steady axial pressure without forcing the bit; allow the tool's impact action to perform the cutting. Periodically withdraw the bit to clear dust and debris from the hole and to prevent overheating. For deeper holes, drill in stages and clear debris between passes.
Usage recommendations
Use appropriate personal protective equipment (safety glasses, hearing protection and dust mask) and a dust extraction system where possible. Match drilling speed and impact energy to the material and tool specifications to extend bit life. For reinforced concrete, advance carefully when encountering rebar and switch to a dedicated rebar-cutting accessory if required.
Product comparison
The drill bit Drill Bit GRAPHITE SDS MAX 28 mm model 57H534 is compared with similar rotary hammer accessories, including options with matching diameters and shank types from Smart, JOBIextra, and AWTools, as well as an alternative size from Makita. All products are designed for use with SDS MAX chucks in concrete, masonry, and stone, but they differ in diameter, length, tip design, and intended use for specific construction tasks.
⚙️ The table below compares the chuck type, diameter, purpose, and design features of each model to highlight practical differences in real-world application.
| Parameter | Drill Bit GRAPHITE SDS MAX 28 mm model 57H534 | Diamond-core concrete drill bit Smart SDS‑MAX 28 mm model 18-280720 | Drill bit GRAPHITE SDS‑MAX 32 mm for concrete, model 57H542 | Drill Bit JOBIextra SDS Max 28 mm (model 82860) for Concrete | Drill Bit AWTools SDS‑MAX 28 x 600 x 740 mm | Drill bit Makita SDS‑MAX 14 mm for concrete, model MA‑D‑33906 | Practical Conclusion |
|---|---|---|---|---|---|---|---|
| Shank type | SDS MAX | SDS MAX | SDS MAX | SDS MAX | SDS MAX | SDS MAX | All models are fully compatible with heavy-duty rotary hammers featuring an SDS MAX chuck. |
| Diameter | 28 mm | 28 mm | 32 mm | 28 mm | 28 mm | 14 mm | The 28 mm models are versatile for anchors and medium holes, 32 mm for larger tasks, and 14 mm for smaller openings. |
| Application | Concrete, masonry, stone | Concrete, masonry | Reinforced and plain concrete | Concrete, anchor holes | Concrete, masonry, stone | Reinforced and non-reinforced concrete, stone | All items suit construction tasks, but AWTools focuses on deep drilling while Makita suits finer installation work. |
◎ The suitability table below evaluates usage scenarios and user needs to help you choose the most appropriate accessory.
| Use case | Recommended product | Why |
|---|---|---|
| Drilling 28 mm holes for general construction tasks | Drill Bit GRAPHITE SDS MAX 28 mm model 57H534 | Provides the exact 28 mm diameter and dependable operation with SDS MAX rotary hammers for professional use. |
| Installing anchors and general concrete drilling | Diamond-core concrete drill bit Smart SDS‑MAX 28 mm model 18-280720 | Specialized tip geometry is optimized for anchor installation and standard masonry operations. |
| Creating larger-diameter holes in concrete | Drill bit GRAPHITE SDS‑MAX 32 mm for concrete, model 57H542 | The increased 32 mm diameter is suitable for demanding tasks requiring wider holes in structures. |
| Deep drilling and through-hole applications | Drill Bit AWTools SDS‑MAX 28 x 600 x 740 mm | The extended working length (600x740 mm) enables deep drilling beyond the reach of standard shorter bits. |
| Fine installation and mounting work | Drill bit Makita SDS‑MAX 14 mm for concrete, model MA‑D‑33906 | The smaller 14 mm diameter is optimal for precise fasteners and detailed installation work. |
The Drill Bit GRAPHITE SDS MAX 28 mm model 57H534 differs from alternatives by offering a well-rounded 28 mm specification tailored for professional construction tasks. It is most suitable for regular drilling in concrete and masonry using heavy-duty rotary hammers. You should prefer this model if you need a standard and reliable accessory for anchor installation and medium-sized holes, whereas for deep through-holes or different diameters, specialized alternatives from AWTools, Makita, or the 32 mm GRAPHITE model would be more appropriate.
