Angle grinder GRAPHITE 59G220 1200W, 125 mm disc, variable speed 3,000–11,000 RPM

Handheld angle grinder GRAPHITE 59G220 is powered by a 1,200 W motor and accepts 125 mm discs for cutting, grinding and surface preparation. Variable speed control from 3,000 to 11,000 RPM allows adapting rotation to different materials and tasks. The tool features an ergonomic body and side handle for improved control during prolonged use and when working at varying speeds.

Advantages

The variable speed range provides precise control for tasks that require lower RPMs, as well as the high speeds needed for fast material removal. A 1,200 W motor delivers consistent power under load, while the compact form factor and ergonomic handle reduce operator fatigue. Compatibility with standard 125 mm discs ensures availability of consumables for cutting, grinding and surface finishing operations.

Suitable for

• Cutting metal sheets, rods and profiles
• Grinding welds and removing rust from metal surfaces
• Shaping and dressing masonry and concrete
• Automotive bodywork and paint preparation
• Light-to-medium material removal and surface preparation tasks

Key specifications

• Rated power: 1,200 W
• Disc diameter: 125 mm
• Variable no-load speed: 3,000–11,000 RPM
• Ergonomic body with side handle for two-handed operation
• Suitable for cutting, grinding and surface preparation on metal, masonry and composite materials

How to use

Fit a 125 mm disc appropriate for the task, ensuring the disc type matches the material and the tool’s maximum safe speed. Secure the side handle and check that the guard is correctly positioned to protect the operator. Start the grinder at a low speed to confirm stable operation, then adjust the speed control to match the task—lower RPMs for finishing and higher RPMs for faster material removal. Apply steady, controlled pressure and keep the disc at the recommended angle for the chosen operation. Allow the tool to come to a complete stop before setting it down.

Usage recommendations

Use appropriate personal protective equipment such as safety goggles, gloves, hearing protection and respiratory protection when working with metal or masonry dust. Select discs rated for 125 mm and for speeds up to or above the tool’s maximum RPM. Avoid excessive side pressure on cutting discs and follow manufacturer instructions for disc mounting and guard positioning.