M.2 NVMe 2280 Heatpipe Cooler GrauGear G-M2HS07-GC with Graphene-Copper Construction

The GrauGear G-M2HS07-GC M.2 NVMe 2280 Heatpipe Cooler is a compact thermal solution engineered for M.2 NVMe 2280 solid-state drives. Combining graphene and copper in its thermal path, the cooler improves heat transfer away from high-performance NVMe controllers and NAND, helping to maintain sustained throughput in desktop and compact system builds. Its low-profile design fits typical M.2 mounting locations and is intended to reduce thermal throttling during intensive read/write workloads.

Advantages

The graphene-copper hybrid construction enhances thermal conductivity compared with single-material passive coolers, enabling faster heat spread from the SSD surface into the heatpipe and fins. The integrated heatpipe and fin array increase surface area for convection while remaining thin enough for tight chassis and motherboard clearance. Passive operation ensures zero additional noise and no power draw from the system. The cooler's form factor is tailored for M.2 2280 modules, providing targeted cooling where it is most effective.

Подходит для

• Desktop PCs with M.2 NVMe 2280 SSDs
• Mini-ITX and small form factor systems with limited airspace
• Workloads requiring sustained sequential read/write performance
• Systems where passive, low-noise cooling is preferred

Key specifications

• Compatibility: M.2 NVMe 2280 form factor SSDs
• Construction: graphene-copper hybrid thermal path
• Cooling method: passive heatpipe with fin array for convection
• Profile: low-profile design suitable for constrained motherboard/mounting clearance
• Mounting: designed to align with standard M.2 screw and standoff positions

How to use

Ensure the system is powered off and unplugged before installation. Remove the motherboard’s M.2 retaining screw, insert the M.2 NVMe 2280 SSD into the slot at the standard angle, and secure it with the standoff and screw. Align the GrauGear heatpipe cooler over the SSD so thermal contact is made between the cooler’s base and the SSD controller/NAND area; then fasten the cooler according to the manufacturer’s mounting method, taking care not to overtighten. Restore power and verify SSD temperature and operation under normal load.

Использование рекомендации

Place the cooler where airflow from case fans can assist convection for best results. If your build includes active M.2 fan headers or case fans, orient them to flow air across the cooler. Check clearance around motherboard components before installation to avoid contact. For drives already experiencing throttling, monitor temperatures after fitting the cooler to confirm improved thermal stability.