Protective film for door handles GrizzGlass BodyShield for MG HS (2024–2025) 4-in-1

GrizzGlass BodyShield for MG HS (2024–2025) is a protective film kit specifically made for door handle zones. The 4-in-1 set contains pre-cut adhesive film pieces shaped to fit the exterior handle areas of MG HS models from the 2024 and 2025 production years. The film protects paintwork and adjacent surfaces from scratches, abrasion and minor impacts while preserving the vehicle's appearance and original finish.

Advantages

The film is thin, transparent and engineered to resist yellowing and weathering, providing discreet long-term protection for frequently touched zones. Pre-cut pieces simplify alignment and application on each door handle area, reducing cutting and trimming during installation. The adhesive backing ensures secure attachment to painted surfaces without leaving significant residue when removed, and the material is designed to conform to contoured shapes around handles for full coverage.

Suitable for

• Protecting door handle paint and surrounding areas on MG HS 2024–2025 models
• Preventing scratches from keys, rings and daily use
• Maintaining exterior finish on leased or new vehicles
• Quick protective retrofit for previously unprotected door handles

Key specifications

• Set composition: 4 pre-cut adhesive film pieces for exterior door handles
• Material: clear protective polymer film with adhesive backing
• Finish: transparent, low-gloss to preserve original paint appearance
• Durability: UV-resistant and designed to resist yellowing and weathering
• Fitment: shaped for MG HS door handle contours (2024–2025)
• Application surface: exterior painted surfaces around door handles

How to use

Clean the door handle area thoroughly to remove dirt, oils and wax residues, and allow the surface to dry. Peel the protective film piece from its liner and align it carefully with the handle area, starting from one edge and smoothing across to avoid air bubbles. Apply steady pressure to secure the adhesive and contour the film into recessed or curved sections. Trim any excess if necessary and allow adhesive to set according to ambient temperature before exposing to heavy use.

Usage recommendations

For best results, perform installation in a dust-free environment at moderate temperatures (ideally 15–25°C). Use a soft squeegee or microfiber cloth to smooth the film during application and avoid stretching the film excessively. If removal is required, warm the film slightly with a heat source and peel slowly to minimize residue; any remaining adhesive can be cleaned with an appropriate automotive adhesive remover that is safe for painted surfaces.