Protective headlight film GrizzGlass BodyShield for OMODA 5 Facelift (2024–2025) 4-in-1

GrizzGlass BodyShield for OMODA 5 Facelift (2024–2025) is a purpose-cut protective headlight film supplied as a 4-in-1 set. The material covers headlamp surfaces precisely to protect against stone chips, scratches, road debris and environmental wear while maintaining original light transmission and appearance. Designed for the OMODA 5 Facelift front lamps, the film preserves fitment and contours, enabling either do-it-yourself or professional application to extend the functional life of headlight assemblies.

Advantages

The film is tailored to the specific geometry of the OMODA 5 Facelift headlamps to ensure accurate coverage and minimal visible seams. Its durable topcoat resists abrasion and chemicals commonly encountered on roads, while the clear adhesive layer bonds without altering optical clarity. The 4-in-1 configuration covers both left and right lamps and includes additional pieces for complex surfaces or auxiliary lenses. Installation can be completed without permanently altering the headlamp housing.

Suitable for

• Protecting OMODA 5 Facelift headlamps from stone chips and scratches
• Maintaining headlight clarity and light output over time
• DIY or professional installation on 2024–2025 OMODA 5 Facelift models
• Shielding headlights from environmental factors such as UV exposure, salt and road chemicals

Key specifications

• Fitment: specific cut for OMODA 5 Facelift front headlamp shapes (2024–2025)
• Set contents: four pre-cut film pieces covering main lenses and additional surfaces
• Material: multilayer protective film with clear topcoat and pressure-sensitive adhesive
• Optical properties: high light transmission with minimal impact on beam pattern
• Durability: abrasion- and chemical-resistant top layer designed for road use
• Installation: wet or dry application methods compatible with professional and DIY fitting

How to use

Clean the headlamp surface thoroughly to remove dirt, wax and contaminants before application. Align the pre-cut film pieces to the lamp contours and apply using a squeegee to remove trapped water and air, following wet-application technique if included. Trim any excess carefully where necessary and allow the adhesive to cure according to ambient temperature and humidity. Follow manufacturer guidance for edge sealing and final inspection to ensure full adhesion and optical clarity.

Usage recommendations

For best results, install at moderate temperatures on a clean, sheltered surface. If unsure about fitment or complex lamp geometry, professional installation is recommended to avoid installation defects. Periodically inspect edges and surface condition; replace the film if significant damage or yellowing appears to maintain optimal light output and safety.