Protective bumper film GrizzGlass BodyShield for Nissan X-Trail Facelift (2024–2025) — set 4-in-1

GrizzGlass BodyShield for Nissan X-Trail Facelift (2024–2025) is a transparent protective bumper film delivered as a 4-in-1 set designed to protect the vehicle's bumper surfaces from scratches, stone chips and abrasion while maintaining the original paint finish. The film is tailored to the dimensions of the Nissan X-Trail Facelift bumper, providing edge-to-edge coverage for the intended areas and enabling straightforward replacement or repair of the protected sections.

Advantages

The film is virtually invisible once installed, preserving the aesthetic of the bumper without altering colour or gloss. Manufactured from a durable, abrasion-resistant elastomeric material, it absorbs impacts from road debris and reduces the risk of paint damage. The 4-in-1 set format allows coverage of multiple bumper zones and simplifies partial replacement if an individual panel is damaged. Designed for exterior use, the material resists yellowing and environmental wear, extending the life of the protected surface.

Suitable for

• Owners of Nissan X-Trail Facelift models from 2024 to 2025 seeking paint protection for the bumper
• Drivers who frequently travel on gravel, rural or construction-affected roads where stone chips are common
• Vehicle detailing shops and installers performing external protective film applications
• Users who prefer a removable or replaceable protective layer rather than permanent paint repair

Key specifications

• Finish: transparent, high optical clarity to preserve original paint colour and gloss
• Material properties: elastomeric, abrasion-resistant film with impact-absorbing characteristics
• Set composition: four pre-cut pieces matched to bumper contours for precise fit
• Intended use: exterior bumper surface protection against scratches, stone chips and abrasion
• Durability: formulated to resist yellowing and environmental degradation under normal road conditions

How to use

Prepare the bumper surface by thoroughly cleaning and degreasing to remove contaminants, road film and wax. Position each pre-cut piece on the corresponding bumper zone, aligning edges and contours before final application. Use a squeegee and heat as needed to conform the film to complex shapes and ensure full contact without trapped air or wrinkles. Trim or adjust overlap only where specified by the installation guide. If necessary, individual pieces can be removed and replaced without affecting adjacent sections.

Usage recommendations

For best results, have the protective film applied by a trained installer or follow the manufacturer's installation instructions carefully. Allow adequate curing time after installation before exposing the vehicle to high-pressure washing. Inspect the film periodically for damage and replace individual sections from the 4-in-1 set as needed to maintain protection.