Protective wheel arch film GrizzGlass BodyShield for Suzuki Swace Facelift (2023–2025) 2-in-1

GrizzGlass BodyShield protective wheel arch film for Suzuki Swace Facelift (2023–2025) is a tailor-cut 2-in-1 set made to shield the wheel arches from stone chips, scratches and road debris while maintaining the original surface appearance. The high-adhesion transparent film conforms to curved panels and provides a discreet, durable barrier that reduces the need for paint repairs and slows wear in high-impact areas. Supplied as two pieces sized for the specified facelift model, the film is suitable for professional installation or careful DIY application.

Advantages

The GrizzGlass BodyShield film combines high adhesion with conformability to complex arch shapes, offering long-lasting protection without altering gloss or colour. Its transparent, low-profile finish resists yellowing and staining, and the material provides impact absorption against stone strikes and minor abrasions. Installation is faster than full-panel treatments and the 2-in-1 format allows targeted coverage of the most exposed arch surfaces.

Suitable for

• Preventing stone chips and paint damage on wheel arches of Suzuki Swace Facelift (2023–2025)
• Protecting against scratches from road debris and grit in everyday driving
• Use during winter months to reduce salt and grit damage
• Professional bodyshops and experienced DIY installers fitting protective film

Key specifications

• Material: high-adhesion transparent protective film with impact-absorbing layer
• Format: 2-in-1, two pre-cut pieces shaped for wheel arch coverage
• Surface finish: low-profile glossy transparency designed to preserve original paint appearance
• Durability: UV-stable formulation to minimise yellowing and maintain clarity
• Adhesive: pressure-sensitive, designed for strong bond to automotive painted surfaces while allowing controlled removal

How to use

Prepare the wheel arch by cleaning thoroughly with a suitable degreaser and removing loose dirt, salt and wax residues. Dry the surface completely and test-fit the pre-cut pieces to ensure correct alignment. Apply a soapy slip solution to the painted area if recommended by the installer, position the film, and squeegee from the centre outward to remove air and moisture. Trim if necessary and allow the adhesive to cure according to ambient temperature recommendations; avoid washing the area for the initial curing period.

Usage recommendations

For best results use a clean, dust-free workspace and maintain recommended installation temperatures; professional fitting is advised for complex curves. Regularly inspect the film edges for lift and clean with mild automotive detergent to preserve clarity and adhesion.